mjck

I Stir quick and furious with a diy propeller fitted into a hand drill to mix this salt well. The instruction leaflet inside did mention not to mix by aeration. Sent from my GT-I9300 using Tapatalk

Any bros got some to spare? Kindly pm. Cheers

Drop a bag of activated carbon in a high flow zone. Clears up the water within hours. Sent from my GT-I9300 using Tapatalk 4

Yah.. a good working dosing pump should not backflow at all. Check your hose for cracks. Sent from my GT-I9300 using Tapatalk 4

Looks like half cooked lobster Sent from my GT-I9300 using Tapatalk 4

Tds specified for new water is < 150. My tap water direct has tds of 100. RODI tds should be around 10. Doesn't look like feasible. Sent from my GT-I9300 using Tapatalk 4

Tds specified for new water is <150. For RODI water, we target to get less than 10 for tds. Newater is RO not RODI. BTW my tap water is 100 tds... Sent from my GT-I9300 using Tapatalk 4

Looks like it Sent from my GT-I9300 using Tapatalk 4

Bought from AM last time. Not sure if they still have. Give them a call. Sent from my GT-I9300 using Tapatalk 4

tried 5 days, not an issue Sent from my GT-I9300 using Tapatalk 4

Change the tube to warm white. The white tube will not yield much growth. Sent from my GT-I9300 using Tapatalk 4

Thanks! Yah i know the hinges will rust in no time so mine got no hinges! The whole front panel will be removable and attached by magnets. All metal screws and brackets have been sealed or coated with a couple layers of lacquer. Sent from my GT-I9300 using Tapatalk 4

Thanks Bro, but I am almost done with the cabinet liao. Just left with the side and front panels. Will start a new post once everything settled. Sent from my GT-I9300 using Tapatalk 4 Beta

2.5 ft Sent from my GT-I9300 using Tapatalk 4 Beta

600 -700 quoted from 2 reputable makers. Diy will be around 150. My diy is in progress Sent from my GT-I9300 using Tapatalk 4 Beta

Not sure... saw some small pcs at their store. They might have. From wat I read some bros order directly from formica. Sent from my GT-I9300 using Tapatalk 2

Ban Heng Long , 11 Syed alwi rd. You can get all the wood, plywood, screws, glue. .. at a good price there. They will cut to watever size you specify. Cheers Sent from my GT-I9300 using Tapatalk 2

Correction for my claims.... the salinity cal fluid did indicate 35sg at 25deg... so optimum is to cal at 25deg. Again way easier and less error than using rodi water at 20deg. Sent from my GT-I9300 using Tapatalk 4 Beta

Stable 20deg c is impossible in our weather. That's why I choose to use salinity cal fluid...you can cal at room temperature with the fluid. Sent from my GT-I9300 using Tapatalk 4 Beta

Fish only tank shouldnt matter as long as it still working..but for corals (photosynthetic), best to change minimum once per year. The tubes suffer spectrum shift overtime . Sent from my GT-I9300 using Tapatalk 4 Beta

All the accuracy is as equally good/bad. Most of the meters come fron the same factory. Best practice is to calibrate one regularly with salinity standard solution. Sent from my GT-I9300 using Tapatalk 4 Beta

Nature aquarium opposite thomson medical center. 1 to 1 exchange ... but you will need to use their canister. Sent from my GT-I9300 using Tapatalk 4 Beta

Cross-stitch plastic canvas ... artfriend will have Sent from my GT-I9300 using Tapatalk 4 Beta

Using a propeller and cordless drill to mix. Salt fully dissolves clear within minutes. No cloud no sludge. Previously using air stone to mix, the solution is never clear. Read from the manual later and it says dont mix by aeration.

Yes artfriend do carry but they are the thinner 2 to 5 mm types, A4 to A3 sizes