tropic

Thanks for the info!

Just curious.The website shows the pail...haha. Maybe come in this big drums depend on how much you need ..

For convenience can try madpetz

v good price for skimmer.

their ebannner is on the forum page...anyway are the white pails inclusive?

the compressor is going to get pretty hot...

Any improvement?

Lc425 , are you using an external controller? Mine is almost the same as yours . 5x2.5x2.5. Using 500a. I think it may depend on your flowrate or also of any additional pump running inside the tank .

well if the container that you need is more than 5 jerrycan worth..then its not worth the trouble to pick yourself up. imagine you need about 200l or more..so best is their nsw delivery. Anyway you see the poor helper doing this...its not easy delivering saltwater.

where do you mount this . I have seen something similar. used for garden.

YEs! manifold is the word..much easier for me to find resources. Thanks for the inputs and link bro. I am planning to run a 5000-6000 l/h pump ..output one for chiller , reactor and others.

Got them at AM. can try seaview also for similar product.

i bought a glass scraper which comes with the handle. come with extra attachement and also a thin plate for scrapping algae on front glass, it works ..

is it running with an external controller?

Sorry for the crappy drawing. I want to do up something as the attached photo. Basically the input is from one of the pumps and its connected to a barb connecting input along a pvc pipe. There are a couple of outputs with control valves to regulate the flow to various equipments such as chiller and reactors , fuge etc. I can use a high flowrate pump and regulate the output to meet the few equipments. Minimise additional pump or heat. Have anyone done something similar to this? I am trying to get some ideas but am unable to give a term to this diy device. I am sure that this may have been done before and hope to see some pictures or suggestions. thanks.

fan for aircon type cost me about $30+. External temp + misc about two blue notes....mounting them inside the cabinet need electric jigsaw and diy skills and plenty of sweat. But at least i did it just the way i want, neat and tidy. first time use those ventilator fan(plastic shroud) dont really last long...maybe the motor couldnt take the heat...melted. 2nd round buy heavy duty...runs like a horse.

nature aquarium at thomson also does 1-1 if your cylinder same as theirs.

Price reduce 25

open for slight neg

Have one set of aquazonic t5 45cm with 16w x 2 tube for sale. Used around 3 months. no rust, cracks. In good working condition. Self collection at AMK st31 S562316. First come first serve. PM me with contacts if interested. Quick deal at $30. Thank you.

Still available. Open for neg.

Go Kelantan lane.. Also have many types of fan sizes sell with ducting . Below the mscp and those below the block.

Must use with external temp controller and the controller activates the socket outlet with my chiller and fan on.

hi. it comes with the shut off device ? I see in the website it comes with the 75gpd membrane instead of 100gpd. Whats the difference?

I have tried a couple of fans. Some fans come with the plastic housing and the white ventilation louvre may not last that long as the heat from the chiller might make the fan give way after sometime. I used a fan meant for aircon with the heavy metal housing and runs with chiller. Chiller on- fan on. Its fixed at the cabinet rear slightly above the chiller exhaust. All other holes are shut out except rear ventilation holes and some multiples metal louvres in front of the cabinet. whenever the fan is on i can fill the slight gush of air being suck into the louvres. I do not really feel warm in the living room as I have a ceiling fan .