Plum

Price drop: Tubby Top-up: $80 CR: $150 Skimmer: $40 Anyone?

Ups!

Not pump included. There are sensors for the water top up which is not in the picture. The rest sold as what you see in the picture.

$90 $180 $50

searching4dan: as what w3ish3ng said, the tubby is to add water to the sump. It comes with sensors that are sticked inside the sump. You tank loses water due to evaporation. If the sump water is below certain level, the sensors detect the change and trigger a pump, which pumps water from a water compartment into the sump. w3ish3ng: I've never setup the skimmer and I have not idea what pump it uses. But if you are really keen I will try to find out for you.

Calcium Reactor: $220 Dimension: 2ft x 10.6" x 8.6" DIY needlewheel skimmer: $200 Height = 3ft, Diameter = 8" Tubby water top up: $100 Interested parties please PM me. Thanks for viewing.

Tank sold and delivered. Thanks for the support! Thread close.

Iwaki pump sold and collected. Thanks!

Last day! Ups.

Full shot: Ups!

PM you. ups!

Both the tank and pump were bought from a reefer here but have never set up. Tank has been cleaned and filled with water to test, confirmed no problem. Tank specs: 1. dimension 4x2.5x2.5, 12mm glass 2. full eurobracing support 3. black silicon with glass enforcement for all joints 4. overflow box on the left with 2xdurso drains 5. 34"x20"x20" acrylic sump with baffles & hayward 1" tank adaptor 6. full Chengai structure 7. 3ft height cabinet, good clearance for sump 8. hood housing 2x250w BLV MH and 2x54w T5 9. pipping included Iwaki MD55: refer to the previous owner, it was running for less than a year. Want to let go at $580 for the tank and $280 for the pump. Will be moving house on this coming Sunday. Hope to clear at least the tank by then. Intersted parties please pm me. Thanks for viewing. black silicon with glass enforcement for all joints:

Hi I am going to setup a 4x2.5x2.5 tank set. The whole set was bought from a fellow reefer including the skimmer shown below. It is a DIY type the diameter is 8 inches the height is around 3ft. I have two questions: 1. What will be the suitable pump for it? "Suitable" means it will best utilize the skimmer. 2. How do I connect the pump and the pipes to the skimmer? Your advice is much appreciated!

Bro REEFSHARK thanks for the advice I have called a professional delivery company for help. They will come to my place next week. Hope can get through.

Hi David pls check your PM.