roidan

damn good liao lah..his yellow tang...too fat become clumsy like mine..not cute looking liao

yeah..his yellow tang just nice hor..not slim not fat...just nice.. u saw mine right? almost bursting out of its scales already

bartletts damn chio.....

here's the previous thread... http://www.sgreefclub.com/forum/index.php?...pic=5843&st=120

wah..the camera really good... confirmed

WMD ... Weapon of Mass-organic Destruction

hahaa... shhhhhhhhhhhhhhhh... secret project...the mother of all home skimmers

i think resun 55 and iwaki 55 little difference except for more heat from the resun..flow wise i think quite close.. but use mx70 will see a big jump in performance.... according to wat i read around...mx70 for 1 beckett is kind of optimum liao..using mx100 is not efficient anymore.... some even use mx70 for 2 beckett injector...hehe but i think the peak is mx70 per beckett ...i think

means buay tahan liao... must join the mx gang liao

slurp slurp...steady

weileong, never show your new bazooka ah

not me right? u talking about weileong u disappear few days mah...so no enforcement lor

i am using a german pond pump.... weileong used md55 on it but teeoff to lower the flow.... no need to hesitate...coz with 3000litre pump at zero head...not enough force to punch the water surface in the black box to make alot of bubbles.. imagine you buy a ferrari 360 but pump only shell92.... ferrari must go with highest grade liao.. just like aquaC needs very strong pump to get the performance....

i think you are using too weak a pump... i am using a pump that pumps out 6000 litres per hour at 0 head.. after 2metres of height..the pump pumps out around 3000litres per hour... if you are using a pump like eheim 1262 that pumps 3400-3500litres per hour at 0 head...at 6 head height...the pump only has enough pressure to pump 1000 plus litres or so or slightly more...go see the graph of the pump...which is far from the 3000litres/hr needed at 6ft height loss and open your airvalve fully....they suggest max air flow in....i never close or adjust the airvalve before...totally open

see my pic u get the idea one.... u should not see water level in the transparent chamber....only foam and it will take time for it to settle and build the foam to go all the way up..dun keep adjusting it...as long as the water level is at the blue line or red line..foam will build up.... if it doesnt after some time....then it means your pump is not strong enough..u need a pump that can simulate about 3000litres/hr at 6ft height.... u read the pump graph...at 6ft height, the pump must still be able to pump 3000litres/hr out...as the injector provides the resistance similar to the 6ft height loss

how come i see clean water in the collection cup? if you set the water level way above the red or blue line i posted...the john guest fitting and airvale will leak water of coz

see mine..no water level visible one...set it below visible..let the foam climb up

red line is where they ask you to set....blue line is where i set

u are supposed to set it 1 inch below the black box..but i set my water level at the black box level itself

where u set the water level

top fin heal back completely..... coming to 2 weeks

u know i like colourful things....pink pink red red i like....

last one

another angle

updates...opening a little bit more any signs of complaints from it..i must move it to another position liao