Jump to content

PJM

Newbie 1
  • Posts

    21
  • Joined

  • Last visited

PJM's Achievements

Newbie

Newbie (1/14)

0

Reputation

  1. Infact both use for drinking too. what i know korean uses more on GAC whereas US uses blocks. Both provide the same function.
  2. Hi guys , if possible try to change the inlet to 1/4" size. It will helps to achieve better results. Enjoy your DIY section .Oops..also free wines & CNY goodies....Cheers
  3. hi boxfish , yes ,those DI cartridge from reborn can fix into 10" filter housing. As for internal of the housing , most of them all the same. Only few brands may have diff internal O-ring design. E.g Atlas brand. hope my info help.....
  4. you may take a look the DI unit at Reborn. May have a better picture
  5. In order to strength the lifespan of DI cartridge . You must make sure the water ppm goes down . As long your advance filter able to do that than it will helps. That is why RO/DI system can last at least 8000L for DI cartridge as water passing thru RO membrane usually give you less than 5 ppm.
  6. For RO, it depends what is the rate for RO membrance . E.g 50 , 75 or 100 GPD . if you able to make full use of waste water than RO will be cheaper in long term run. Also need to consider how much pure water do u need everyday.if usage is low than DI should be fine unless u really need alot to top up . Of course DI cartridge will be expensive.. but for RO/DI you also got to change the 1st and 2nd quite often too.
  7. PJM

    DI water

    2 containers of DI water cleared...
  8. hi , mineral and spring water are the same . which contains natural minerals . Therefore TDS will be higher as they are dissolove solid. As for distilled water. It is close to RO water whcih consider pure water with no minerals in water therefore it reads zero TDS . For DI/RO system. The mix bed resin filter normally can last at least 5000L as after passing water thru RO membrane will have less than 5 ppm in water . the lower the ppm the lasting the resin filter.
  9. PJM

    DI water

    hi there, still have 2 container of DI water with me now. interested party , pls call me at 6251 2895 self collect at balestier area. Thanks william.
  10. PJM

    DI water

    Hi bro , i have collected another 2 containers, Let me know if u still need some more..
  11. PJM

    DI water

    hi guys, this will be in the market next month...... Origin use for home use drinking system. cheers william 62512895
  12. PJM

    DI water

    hi amphipod, well i'm dealing with water filter for drinking.Some hobbists have approach me before for DI resin cartridge. I have imported in some mix bed colour resin from korea. stated lifespan is 500-600L per cartridge if water ppm is below 65-70. i'm doing a test now to see what is the max. it can goes. will post in classified next month..
  13. PJM

    DI water

    ok. sorry for those guys who pm me too. i only have 2 containers to collect.. perhap u can pass me your containers on sat morning. Once top up , i will call u for collection. i can only take in another 6 x 25L containers as i'm doing a test on the resin lifespan...cheers
  14. PJM

    DI water

    hi guys , i have 2 containers of 25L each DI water with me.Anyone near balestier area can collect from me. or else will go to drain...
×
×
  • Create New...