shootsimon

Is 3 for $70 consider good grab regardless of size?

Do you have two down pipes if yes this method will help Here it goes. Add a valve control near the outlet of the down flow pipe. Make sure all pipes are glued! This enables you to control the water level in the overflow box to the desired level and thus no more waterfall effect. When it reaches the desired level, tune the valve control till the right flow rate. This way you will not over flow the overflow box. Observe the overflow box for about a day to see if the flow rate is same as your return. This is to prevent over flow. If you have two down flow pipes, use one for overflow. Extend the pipe slightly above the water level and below the edge of the tank of course. This way if there is any overflow due to blockage or slower flow rate, the 2nd pipe will there to take the overflow. You don't need a valve control for this pipe. Make sure the down flow pipe end is immerse in water if you want to elemenate the return sound at the sump. What if only have 1 flow back pipe. You have to make sure that the flow back rate is always the same as the return or otherwise use the durso method. Have tried the durso but still have noise (flushing sound at times) and had a hard time controlling 2 durso. Most of the time only one is working. Have since given up on durso. Thanks to Reefer Alanseah for his knowledge if not I will still have a waterfall at home.

What's the flow rate of the 1250? I might be interested and where to pick up?

Will take the corals for $10-15? No pics so cannot judge how much worth

I have those industrial 4ft FL light housing that can hold up to at lease 4 T5 tubes. Like the ones bro haanZii used. Can take a look at his thread http://www.sgreefclub.com/forum/index.php?...pic=33524&st=30 Hope bro HaanZii don't mind sharing

Pic of Mh light up Ok rely last pic of the day. Going to pick up my Ph/ORP meter liao.

Final pix of the day my 6 ft Black Galaxy before light up

Last here's some update to my equipments and Life stocks 1) Main return: 1 x eheim 1262 2) Chiller: 1.25hp RR(decided to keep) run by 1 x eheim 1262 3) Skimmer: Schuran powered by 1x eheim 1260 (running in sump) 4) Hailea Ozone Generators (collecting tonite) 5) Wave maker: 2 x Tunze 6080 (might change to 6000 or 6100 with controller) 6) Lights: Black Galaxy 6ft 3x 150 MH 7) Sand: Grade 0. Topped up Grade 1 total 6" with LRs 80- 100kg 8) Sump: Bare sump 9) Resun FR 1000l with Rowaphos Future equipments on mind: 1) Auto Top up 2) CR (planning to DIY one using Eheim 2213 canister filter) Live Stocks: 1) Maroon Clown x 1 2) White Strip Clown x 1 3) Africa Clown x 1 4) 6 Line Wasse x 1 5) Algea Blenny x 1 6) Coral Beauty x 1 7) Blue Tang x 2 8) mix damels x 8 9) Sea Cuke x 1 10) Cleaner shrimp x 2 Corals: Have plans to keep LPS 1) None

Thanks for the comment. Still got long way to go man. Next on line is my africa clown. Hope I name it right. Its in my float container just in case ich attack. I have done fresh water dip on him for almost 2 minutes defore putting him in. No QT at the moment. Will set up one once I've clear up the place. Got the microalgea from Sunny.Thanks Sunny! Will put it in my sump once extra LRs cleared from there.

Another shot

This is my favourite. My algea blenny.

Another shot of him.

Here's another fishy my 6 line wasse. Got him from another reefer for $6 and later found out that LFS selling $4 but no regrets as he is healthy and eating happily in my tank.

Thanks bro weileong. I'll take note of that. If my fishes are ok with both Tunze running I'll run both. But if not will look out for the 6000 or 6100 model. Here's another pics of my BT. Both pics taken last night. This one can see the tummy fat fat after feeding. Sorry had made a mistake. Only had them since Sat which is only 4 days

Closer shot of my BT

My 2 BT who suffered ich and now slightly better. Been with me only less than 2 weeks. Feeding them with fomular 1 pallet soaked in garlic. Hope they will fully recover.

Here some pics of the occupants. Here's my 1.5 yr maroon clown in his hidout

Pic of my 2 Tunze 6080. Only 1 will be switched on at a time. Duration still working on it. Maybe intervals of 4 hrs left side, 4hrs right side and stop 2hrs and start all over again. Anyone has any comments on this?

Here's the right side from inside guest rm

Looks quite similiar to my previous scaping. Guess its because of my 4 return pipes I'm only able to do it this way. The only diff I find is on the left side of my tank with LRs covering my main return pipe. Here's some closer view shot from inside my guest rm

Still doing minor shifting of my LRs. Find that there's too much gaps between the them. Another pic taken with flash

Here's the result of my rescape. Took my a few days to make it perfect. With help from my lovely wife ( shift left err no shift right........ )

This pic is for Bro Siaokia as promised My Jetskim 200 at work Not much skimate yet as very low bio load Skimmer is placed in my sump now to make space for CR and auto top up reservoir.

This is my favourite piece Full of coraline algea

Various sizes from fist size to 8 fist sizes. Must stack them up one by one.