jackalcleo

All this for just $35 no individual sale. All is at least 3/4 full or never use at all execpt for Marine Trace is 1/2 full. Self collect at CCK. Hp : 96896895

Fan $20 (unused) Refractometer $50 (used a few time for hypo model : RHS-10ATC) AquaZ Carbon $8 (unused) Coralife Salt $35 (not open 50 gallon mix for 1 bag) Self collect at CCK HP : 96896895

Hi i have 1 hang on type Weipro 2012 for sale also. pm me if interested. Selling cheap.

upzzzz

another

another pics

That's the best i can take

Will try to get a camera to take

1) Blue face Angel $40 (around 4 inch) 2) Majestic Angel $50 (around 5-6 inch) 3) Rusty Angel $5 (around 2 inch but 1 side eye blind) 4) Lamarck Angel $10 (around 3 inch) Take all fish for $80 LR selling for $5/kg and total is around 50 kg take all for $200. Collection at CCK HP : 96896895

u have pm

u have pm

u have pm

if you are using MD55 for your 24" already then my 32" need to be at least same or better

Is 1500L/hr the min require amount of flow to go through the beckett nozzle?

hi do you have a pics of it??

For beckett pump selection which is more important? The pressure rating of the pump or high flowrate? Eg like MD55 is pressure rated but only 3000++L/hr compare to Rio32HF not pressure rated but high flow of 7000++L/hr.

Have already wipe clean the glass but still happen. The black seems to be a bit stiff to me though.

Just got an used Seio820 and the 4 black glass suckers just not seem to be sticking well to the glass surface. The top 2 sucker just keep falling off and blow onto the sand bed. Any suggestions or change new ones Wonder LCK 110 have sell these suckers or not?????

will consider that. Still in dilema whether to change my Rio32HF pump to MD55 for my Beckett

u using 1.25" pipe size also for your setup or some other size????

Thanks a lot bro weileong so like what u suggest a 1.25" pipe that means need reducer at the pump inlet side is it????

Can u kindly draw me a rough sketch for this DIY???

As for no 1) i can add a check valve on the inlet side so i only prime for the first time i start up As for no 2) Can explain further? u mean pump need to work harder need to the suction on the inlet????

Thinking of using this pump to drive my Beckett. However saw in most thread the md55 was placed at ground level. As my sump was a DIY 1 i didn't have any PVC inlet pipe specially installed at the bottom of the sump. Was thinking of placing the pump above the sump and connect pipe 90 deg down to suck up the water to the Beckett. Is this possibe?????

upzz for your jumbo tank sale.