dersuz

Macro protein skimmer and Rio 2100 needlewheel pump.

Got some marine equip for sales after closing down my 2ft quarantine tank. 1) Coolworks ice probe (ideal for 2ft tank and below) - $170. 2) Macro protein skimmer ASF400 c/w with Rio 2100(diy needlewheel) - $50. 3) Canninster filter - $40 4) I-ref hang on refugium - $60.

PMed you. Still no reply.

Just called him, light set has been reserved.

Another pic on the skimmer. Currently, I'm having a LR tank only with 1 yellow mimic tang 1 six wrasser 1 frishery angel and few yashia gobies. Very low bio-load in my tank and the skimmer is able to skim some quality skimmate. Will try to adjust for more dry skimmate.

This is really a good skimmer. I have test run this unit for 1 day on my Iwaki MD40 and it skimmed 5minutes after the installation. But too bad, someone has already ordered that unit. This is my 24" beckett done by Chipson and it break in after 1 day. The pic shows the skimate after 3 days running it.

For your info, effect from 1st July 2004 electrical rate will increase from $0.158 to $0.1635 per kwh. Happy reefing.

Can try reborn, got alot of them. Saw it last week.

SRC sponsor Reef Depot. Check their website.

What kind of bulb are you using?

It don't comes with a needle wheel impeller, so you can't use it on the H&S skimmer for optimal performance.

Can get it at Clementi Blk 354 hardware shop - Sun Hee. Closed at 7:00pm to 7:30pm.

Office hour, Saturday half day.

Model 6000 is tunze stream, controllable type at 7000l/hr but without controller, only the blue box to adjust the speed. Model 6010 is tunze stream with controller that can pulse 30% to 100%, feeding mode and night mode.

Make sure your ballasts are tightly screwed onto the casing with screws and nuts, if not there will be some vibration cause. Also, from the pic it seem your left ballast is touching the left casing. Try to keep a distance away from both sides of the casing.

Price reduce to $250neg. Ideal for FOWLR tank.

Further revised of price to $300 for first set and $150 w/o tube for second set.

How about going for a 3'x3' square tank which got more space and volume. Will get some frags from later when all my equipment are up and running.

Price revised to $320 for first set and $180 w/o tube for second set. T5 light set DIY by dr evil. T-load the pic from another reefer.

My Resun MD40 pump also produce very high pitch noise at times, has stop using it since . Now running on my Iwaki MD40 from Benz, very quite as compare to Resun. Also Resun pump run very hot which might not prolong their life span, IMO.

Pic.

Got 2 sets of 4ft T5 lights selling at $350 per set. Set 1 comes with 2 X 54W Ballasts, 3XATI AquaBlue Special & 1XActinic Blue T5 tubes(used for 3 months). Set 2 comes with 2 X 54w Ballasts, 2Xcoral blue & 2x10000k brand new T5 tubes.

HI , Pump still available, have not use it.

It cannot be use anymore cause the coil is burnt. It can only turn 'ON' and will never off. Try to off it using the overright switch, if it cannot off then confirmed the coil is burnt.

You need to get the ES220 contactor which connect together with the hager timer to do the switching function.