Joe_P

You can get them at Hai Cheong Plastics... theres one at Kallang and another at Ubi... PM me for the Address and contact...

What then are good concepts for Calcium Reactors...?? Is the Korallin CR considered as one with a good design???

I did a design that can be view from both sides.... But I have to get pictures as this pic is a little outdated...

This one....???

Hi Guys, All items posted are SOLD!!! Nleong and Coralreef, pls PM me the list of what you guys are keen on again...... Thanks.... For the rest who have PMed me before this closing, pls confirm again by either SMS / PM ... collection must be by this weekend.... Thanks for your support...

Hi Guys, need those who have PMed me or SMS me recently regarding frags from my reef to please contact me again to make arrangements... I might have lost track of the arrangements made previously as I have been a little on the busy side with my CA DIY... Thanks.... And I might consider going for a 2nd round of fragging... this time on the staghorns in my reef..... Anyone interested???

There is a lesson to be learnt here... and that is always read up and find out the requirements of the specimen that you intend to obtain before commiting.... I believe that rule has been violated..... Ribbon eels are pretty difficlut to sustain specimens....

Friend... The issue is settled... no bad feelings... besides you did PM me regards your situation so.... You ain't classified as in the " fly aeroplane" category...

Drill Press??? Dun think I can afford them and also find space to house it.... Only drilling on flat acrylics........ so a Hand Drill should be enough....

Excellent, will start looking and see if they are still available there....

Ervine, Hows the reflectors??? Are they parabolic in nature.... I'm thinking of modifying the above mentioned fixture to hold DE bulbs.... and if the reflectors are not parabolic, might also be DIYing them...... Only thing is to get the RX7s which I'm currently experiencing difficulty with......

Fil;e the corners....??? ain't drill bits hardened carbonic steel??? Pls share... cos I'm alittle lost...

Is there a hold saw for size 9mm ??? How much would a hold saw cost me??

Hi Guys, Looking for those Rx 7s for those 250W DE bulbs... Plan to modify those 250W SE holders into a DE version with Parabolic Reflectors.... for my future reef.... Where can I get these RX 7s???? Anyone...??

Drill bits for acrylic?? Modify?? How do I do that??? I'm actually holding on to one of those cordless drill but they can't hold a 9mm drill bit .... Btw, to get a 9mm hole, is it safer to drill a smaller hole so as to guide the bigger drill bit in......???

Check out PR for their stock of A.R.M .... For pricing, you will need to contact them.

I have a black and Decker but its single speed... acrylics are bound to crack... and I'm using it to drill 9 mm diameter holes... so miniature drills are out......

Hi Guys, Jus wondering if there are such power drills available that can rpm control.... Need it for drilling acrylics so would need something slower...

No one??? Thinking of adding 2 into my reef....

Hi Guys, I think I saw a few specimens recently in LFS... Anyone keeps them???

Hi Guys, Jus went for some fragging yestersday... And discovered that had some trouble fragging some of the colonies.. THe following frags in set 2 are therefore not made available.... The pink Milli and the Tri colour table.... Sorry Guys.....

Definitely more than 100 kg.... Prefer to sell them at min 10 kg per purchase....

Hi Guys, Jus gone through some of my SPS and here's the list of the acros that are large enough for massive fragging attempt ..... Those going for the 5 frags per set (set 1) will have the following... 1 x Pink Birdnest Frag 1 x Brownish Pink Birdnest Frag 1 x Yellow body with green polyps Acropora Frag 1 x Cream coloured Body with pink tips acro Frag 1 x Blue tip brown body Acro Frag Frags are sized from 1.5 inches to about 2 inches ........ The 10 frags (set 2) set will comprise of frags from the 1st set plus the following.. 1 x Lavender polyp with purple tips acro frag (limited) 1 x light Pink Milli acro frag (limited) under extreme lighting will develop blue scales... 1 x Tri colour acro frag (my favourite piece) 1 x white body with light blue tips acro frag 1 x Tri colour table... ( green with purple tips ) frag (limited) Frags are sized from 1.5 inches to about 2 inches ........ First collection date : Sunday or Monday evening Pls PM or SMS (preferbably) me which set you are keen on and date of collection .... As there are limited stocks, I will function on the first come first serve basis.....

That might be a little difficult.... My reef still stocked with acros... The acros will have to go into my holding tanmk first before the Liverocks will be made available.....

Hi Guys, My Liverocks are for sales again... Previous intended buyer PMed me stating that he jus came up with some financial difficulties... I'm pricing them at $8 per kg... Please PM me if you are interested... Cheers.