peong

Hi guys, Anyone interested to takeover this tank? is a new tank still with the maker, you still can decide where to drill the two holes at the bottom glass. Very good workmanship and cheap, only at $140. (own transportation) Reason for sale: too rush into decision, never consider how to talk to my CEO as we will be shifing end of next year, so better not to start up anything from now. Any kind person wanna adopt this tank? Can use for top down views and side view as well. Design: 1. 2.5ft x 2.5 x 1.5height 2. two holes at the bottom glass 3. thickness 10mm 4. top braceless and arounded bracing at the bottom Tank can ready anytime once u decide where to position the two holes. If interested pls pm or sms or call 97846734

Hi guys, I'm planning to setup a 2.5ft x 2.5 x 1.5H top-down views reef tank, stand will be same size as tank so the total height is 3ft, just good enough to stand straight and capture all views from the top, is just the same as how we select corals at the lfs. But tank's height at 1.5ft will it be too deep? and width 2.5ft will it be too far to view bcos one side of the glass will against the wall? My intention for a 1.5ft depth is mainly to reduce the wavy surface as I will also wanna try with some SPS and they needs strong waves, further more, a deeper depth will allows me to enjoy the side viewing too. But my worry now is that I will not able to see those stuffs on the sand bed when viewing from the top. Need your precious experience sharing and suggestions, my alternative is a 3ft x 2 x 1H (or 14"H) , how you think?

Thanks for ur offer, bro. My setting is actually a top view reef tank, if use your stand my total height will b reaching 4ft, that's abit tall for me unless I could change my plan. Please let me wait for 2 more days and come back to u.

Hi guys, Just try my luck here to find the above wooden stand for my new tank (size: 2.5ft x 2.5 x 1.5H), don wanna custom made cos just for temporary use only. Please pm me if u hv n wanna let go.

Item has been reserved for KISS Thx all supports!

upz for myself

bro mopiko, u r right! The paint will be slowly flaked off when time goes by, it also depends on what surface u spray on, but it will last at least 1/2 a yr in this case, and by then u might be seeing coraline algea on it.

Last piece, sell at $80 also, the Floating ZE cleaner cost me $23.80 liao. If you want me to spray wif the black epoxy paint also can, no extra charge but let me know in advance.

Well, just to show u guys for an alternative... - END -

This is how it looks...

Floating ZE Cleaner (L size for 16mm glass thickness) - $28 not yet discount

update: Just tested on the grip power on 10mm glass wif good result, unfortunately, it's too weak on a 12mm glass, so I changed to "Floating ZE Cleaner" (L size for 16mm glass thickness). Now no problem even on a 15mm glass, but this one cost me $23.80 after discount.

Was already proven wif my seahorse tank setup, I even sprayed the entire back glass internally, for this, it just a very small portion.

Aiyoyo.. still hv problem wif the link, try this: http://www.sgreefclub.com/forum/index.php?showtopic=81992

Oop.. try here

Left 1 for my 6060 wif DIYed magnetic holder, only at $80.

never try b4, but surely no problem for 6060 and 6080, the bonding power is super.

As I promissed to post the DIYed magnetic holder, the link is : here

After 24 hrs to get it dry, you can use spray paint to cover the bonded marking and the sliding unit if color is not black. End product! - total cost is about $15-$20 as compare the original tunze at $55.

After the sliding unit has bonded on the inner piece of the magnet cleaner.

4. Acrylic epoxy spray paint (optional) - $4.50

2. BONDITE epoxy putty - $4.20

1. MARINA magnet glass cleaner (size: 6cm x 8 x 1.5) - $14.00 should be no problem for 12mm glass

Hi guys, Just share wif u my recent work on a DIY magnet holder which using of magnet glass cleaner. Items you need: 1. MARINA magnet glass cleaner (size: 6cm x 8 x 1.5) - $14.00 should be no problem for 12mm glass 2. BONDITE epoxy putty - $4.20 3. Sliding unit from the original holder 4. Acrylic epoxy spray paint (optional) - $4.50 5. Masking tape (to cover some area u don't need to spray) - optional

Will post a pic tonight, if u think my idea is gooood n cost saving, pls remember to give a thumbs up.