zaiqiu

PM you

Just wonder whether anyone bro try putting in both ROWA and PURA together in FR? Not sure whether is there any chemical reaction for mixing the 2 media....theoretically, both use adsorption method, so should remove both Phosphate & Nitrate together....

Is that a new rod?

Hi, Usage? Place of collection?

pair of really black clowns??? WOW!! Still available from CF??

Yup, my tank is bare now Will clean away the calcium n algae, and a wash before starting up the tank. tks for the feedback

Deltec EZY-CLEAN (500 ml) Ezeclean can be used anywhere lime deposits have formed, such as on aquarium equipment or glass. Ezeclean removes even the most obstinate lime deposits simply and effectively. It is perfect for decalcifying pumps and pipes or any other piece of equipment that can be easily removed from the aquarium. Application: Dissolve 6 teaspoons per 1 pint of freshwater. Stir until dissolved. Immerse the equipment to be cleaned into the solution for approximately 2 hours. After 2 hours, remove the equipment from the solution and rinse it off thoroughly with clean water prior to placing it back into the aquarium. IMPORTANT: EZECLEAN MUST NEVER BE ADDED DIRECTLY TO THE AQUARIUM Available at Reef Depot now. Anyone try already? Is it harmful to marine life if I use it to wipe the interior of the glass to get rid of calcium & algae?

If M820 up for sales again, pm me

Very nice fishes!! But a queen and french in a sump???!!!! Inspiration for my upcoming 3x2x2 haha..... Intend to have a King and Queen, maybe a Majestic too haha I notice juvenile King and Queen have better colouration than adult form....I should be sourcing for juveniles!!!

Thanks bro mansiz for your reply Maybe to address some of the potential problems you highlighted 1. The return pump you can tell when you start up the whole set up. Your overflow is those inbuilt one right? When you start up the return pump, water starts to flow down into the overflow, if you heard loud noises (not the water fall sound), like pop pop pop, means your return pump is not good enough. There should not be too much air for the downwards pipe o take in, if not you will have endless nights, loud noises. I intend to make a durso standpipe (30mm pipe to 25mm bulkhead). Hopefully can cut down on the noises. Understand it takes some fine tuning on the hole size at the end cap. haha. 2. Chiller no problem, but be sure to service it annually to increase its life span. If you intend to make two power head to work together on the main tank, I don't think thats necessary, unless you are keeping something that requires high flow rate. Just one power hear will be enough. And most probably you will be placing it higher up instead of lower down, if not your sand bed will fly and some parts of bare bottom will occurs. lus you have the return pump, it creates some sorts of small currents as well. Chiller pump does not have to be too strong. As you should understand that Resun chiller chiller water by letting the water run through a very cold rod, if your water flow rate is too fast, it could be a negative factor. you can take a look at the box or the guide and follow the flow rate for the chiller. Then I probably try with the seio620 first. If not strong enf, then will add in another wavemaker. Intend to use Grade 1 sand. Was told Grade 0 is too fine, will create a sand storm..haha Will adjust the chiller pump lower for a slower flow through the chiller. Just worry that the aquabee up3000 might not be powerful enough for the return as well as to create the 'flushing' effect in the main tank. 3. Hmm, after browsing at the picture you drawn, I've got a doubt, how come your return pipe goes straight down to the bottom of your main display tank? The overflow chamber in the main tank comes with 2 holes, one 25mm, one 20mm. Was contemplating whether to use the 20mm as spare overflow pipe. But if that's the case, I would have to route my return pipe outside the cabinet, which can be unsightly. Hence in the end, plan to use it as return line instead

Hi Guys, Going to start a 3x2x2 marine tank. Like to seek the bros' recommendation/suggestion as I start up the tank So far already have the following equipments: Tank Specs: 3x2x2 Sump: 30"(L)x20"(W)x15"(H) Chiller: Resun CL650 Skimmer: AquaMedic Turboflotor 1000 Multi SL with PH2500 pump Pumps: Aquabee UP3000, Sicce Extrema Wavemaker: Seio 620 (maybe adding another Seio 820 ) First must do up the pipings. Overflow Dia: 25mm, Return: 20mm Thinking of using the aquabee UP3000 as return pump, with the tee-off from the Chiller (using Extrema). Intend to do a inverted 'T' piping at the back wall of the tank with rainbar spraying to prevent algae growth. Can the above work? Are the return & chiller pumps powerful enf?

Any update on CF??

There's no hook on the OHF itself. So you either need a side bracing or a centre bracing in order to rest the OHF across.

Hi bro, The OHF is non-extensible type. It's purely for 3ft tank Actually bought it at C328. Used for a yr plus. Can see the gd condition. Can give you a good price if you take everything!

3ft stackable filter for sale too $30 ps: totally cleaned up!!!

Ya....is CF coming in with new shipment?? Especially new percula clowns?

Me too A + B + C = $20

I am waiting for the percula babies

Have seen some at CF on National Day

Did a search http://www.marinecenter.com/fish/clownfish...kwhiteaustrali/ Lovely clowns....begining to like them Which LFS selling now??

Bro Ian best explained it Rem ML once had it....and ex! I was still wondering y so ex? hahaha...... Waiting for the pic too.....

Ohhh......from the pics, they seem to be False Percula $130 for a pair is dirt cheap if it's really the black percula as below: Maybe Bro Terryz can show a clearer pic. Drooling liao

I suppose they are False Percula Pair??? $130???

Interested. Any pic on the condition of the PH monitor?

Is CF open today on National Day Holiday??