Harlequinmania

Scientists from the Instituto Español de Oceanografía (IEO) have once again obtained viable bluefin tuna spawnings in their facilities in Murcia without the need for hormonal induction. A new opportunity to study the way in which this endangered species reproduces in captivity. The researchers are confident that they will achieve far greater results than those obtained over the past two years wherein survival rates of between 73 and 110 days respectively, were obtained. View the full article

Click through to see the images. Matt Rogers writes: "Few aquarium LED lamps can match the current buzz of the Kessil A150 LED aquarium lamp. On the surface, a lot of it is due to rave reviews from the select individual hobbyists and local fish stores that have been testing the Kessil A150 over their aquariums. But dig a little deeper and a bigger story is the company behind the name. Kessil Lighting is a brand under the DiCon Lighting division of DiCon Fiberoptics Inc. The massive 200,000 square foot headquarters of DiCon Fiberoptics is located in Richmond, California and this 3reefer recently got a look inside." I don't want to steal 3reef's thunder, so head on over to 3reef.com: Kessil Lighting - A look inside the company behind the Kessil LED A150 to read a lot more about Kessil and their A150. Some juicy tidbits to whet your appetite: Kessil performs on-site R&D and testing at their California facility.The first 300 units of A150 pendants sold out. The next batch of 3,000 will be available end of June/early July.The A150 will come in five (not three) color temperature options: 3000K, 6700K Amazon Sun, 10000K Sky Blue, 15000K Ocean Blue, 20000K Deep Ocean And here are a few photos from Matt's tour: kessilhq2.jpg The machine shop at DiCon Fiberoptics kessilhq3.jpg Kessil test booths kessilhq.jpg The newly introduced Kessil A150W View the full article

1. Harlequin Mania , CT0100 / White / L / 01 pcs 2. Harlequin Mania , CT0101 / Navy / L/ 01 pcs 3. CFOH / CT0104 / Yellow / L / 01 pcs 4. Siang / CT100 / White / M / 01 pcs (sorry, age catching up) 5. tunicate / CT0100 / White / M / 01 pcs 6. qiang / CT0100 / White / M / 01 pcs 7. Cedric/CT0106/Red/M/01pc (Male) 8. Cedric/CT0306/Red/M/01pc (Female) 9.Cedric/CT0205/Red/28"/01pc (Kids) 10.swiber/CT0100/ White/ L / 01pcs (male) 11.Swiber/ CT0100/ White/ S / 01pcs (female) 12. Yellowtang / CT0102 / Black / L / 01 pcs

Update from SL ; Starki damsel ( left about 6 today ), Goldflake , regal angel (yellow belly), multi bar angel, blue tang, venatus angel, false personifer, and scribber angel.

Haha.. Good idea, i make this limited edition only for you so everyone know you wherever you go lol..

Click through to see the images. Initially, she thought nothing of the scratch that she received while working with her freshwater aquarium. However, once it became infected and would not stop oozing, her mother became concerned. Antibiotics proved ineffective in treating the wound, so she sought a diagnosis from a dermatologist. In the end, it was discovered that her scratch was infected with a rare bacterial strain of Mycobacterium marinum, also known as fish tank granuloma. M. marinum is commonly found in both saltwater and freshwater aquariums. Strains that infect humans, though, are rare and are sometimes found in aquariums with fish infected with tuberculosis. While not contagious, M. marinum is particularly invasive, causing skin wounds, damage to deep tissue, and even bones. Doctors from both UCLA and Loma Linda Medical Center have performed two surgeries and have tried a myriad of antibiotics to combat the bacterial infection to no avail. It grows stronger and has now become drug-resistant. A third surgery is planned to remove necrotic and contaminated tissue and to ascertain the extent of the infection. She may soon lose her hand if the bacterial infection is not stopped. This is just another reminder to be careful with the glass boxes we keep. Some general guidelines to follow to minimize infections like this would include wearing gloves while working in your tank, never working with with exposed cuts, and thoroughly washing with soap and water afterward. Watch the news report for more information on how this infection has affected Hannele: (via Orlando Sentinel) View the full article

Click through to see the images. Initially, she thought nothing of the scratch that she received while working with her freshwater aquarium. However, once it became infected and would not stop oozing, her mother became concerned. Antibiotics proved ineffective in treating the wound, so she sought a diagnosis from a dermatologist. In the end, it was discovered that her scratch was infected with a rare bacterial strain of Mycobacterium marinum, also known as fish tank granuloma. M. marinum is commonly found in both saltwater and freshwater aquariums. Strains that infect humans, though, are rare and are sometimes found in aquariums with fish infected with tuberculosis. While not contagious, M. marinum is particularly invasive, causing skin wounds, damage to deep tissue, and even bones. Doctors from both UCLA and Loma Linda Medical Center have performed two surgeries and have tried a myriad of antibiotics to combat the bacterial infection to no avail. It grows stronger and has now become drug-resistant. A third surgery is planned to remove necrotic and contaminated tissue and to ascertain the extent of the infection. She may soon lose her hand if the bacterial infection is not stopped. This is just another reminder to be careful with the glass boxes we keep. Some general guidelines to follow to minimize infections like this would include wearing gloves while working in your tank, never working with with exposed cuts, and thoroughly washing with soap and water afterward. Watch the news report for more information on how this infection has affected Hannele: (via Orlando Sentinel) View the full article

Click through to see the images. Between April 26th and June 10th, scientists traveled to the Philippines for the largest expeditions in the history of the California Academy of Sciences. While there, they chanced upon a coral spawning event and recorded video of the event in addition to collecting many fine specimens including an ornate ghost pipefish which is now spawning in captivity. In the below video, Steinhart biologists are shown collecting coral fragments for their collection. When colonies were found that were an interesting shape, color, or species, biologists either carefully clipped off small branches or found already broken-off fragments lying nearby. All of the fragments were legally exported and then subsequently transported to their Golden Gate Park facility as part of their efforts at sustainable collection-building. The plans are to grow these small cuttings into larger colonies, which can then be fragmented to produce corals for display, in-house research projects and exchange with other zoos and aquaria. Watch the video below to see them in action: View the full article

New Australia coral shipment arrived in Marine Life yesterday. Detail will be announce shortly.

Hi CF, The back print of the logo will only be a single color which is blue. the measurement should be the same as the last round since it is from the same supplier, but i will check on it again.

Started this new topic for all to share any design / view on making the new SRC shirt print for this year 2011 . Please share your wicky idea / design suggestion that you have.

Thanks guys for all the suggestion on the design on the polo t- Shirt. ( Please keep it coming keke..) The initial idea was to have a SRC T-shirt since we already have a Polo-shirt design from last year. I have created a new topic on the new Polo -short design suggestion; ( please check here ), so that this thread will not be diluted. Depending on the respond of this order, maybe we will just switch back to making a New design Polo Shirt instead. ** PS: i have moved some of the post to the new suggestion section for easy reference and not to confuse those whom is still interested in the T-shirt.

A new study has found that sunlight decreases the toxicity of golden algae, which kills millions of fish in the southern United States every year. View the full article

A new study has found that sunlight decreases the toxicity of golden algae, which kills millions of fish in the southern United States every year. View the full article

Extreme flooding of the Mississippi River this spring is expected to result in the largest Gulf of Mexico "dead zone" on record, according to aquatic ecologists. View the full article

Scotland's first fully protected marine reserve, and only the second in the UK, is already providing commercial and conservation benefits, according to new research. (2011-04-22) View the full article

Click through to see the images. Nuisance algae are perhaps the number one challenge facing aquarists and various strategies exist to prevent their growths. Pretreatment of makeup water (including reverse osmosis filtration, deionization), additions of high pH solutions of water and calcium hydroxide (kalkwasser), protein skimming, algal scrubbing with macro-algae, use of fish foods with low phosphorus content, etc. all can help control nutrients responsible for algal outbreaks. These methods have one thing in common - they target the element phosphorus. Phosphorus is an element essential for all life forms including plants and algae. Indeed, bags of lawn fertilizer are marked with numbers (such as 10-5-5) indicating the amount of nitrogen, phosphorus, and potassium ('macro-nutrients'), respectively. If we were to remove or limit one of these macro-nutrients, we would be able to control the growth of plants and algae. This concept is known as Liebig's Law of the Minimum, which states plant growth is not encouraged by the total amount of nutrients available but instead by the one least available. Hence, phosphorus is often the element targeted for removal. Biological removal is possible, but requires a certain sequence of biochemical events. More often, phosphorus is removed by chemical means and is often done on industrial levels in wastewater treatment plants. It can be done in aquaria as well. Recommended phosphate levels for reef aquaria vary somewhat although most are generally low (~0.03 ppm, or mg/l - 3 parts in 100,000,000 parts - quite low indeed). Silica (SiO2) is of concern to hobbyists because it is used by diatoms to create their skeletons. Outbreaks of diatoms are characterized by brown coatings or filaments. While diatoms in themselves are not harmful (useless they smother sessile invertebrates) they can be unsightly. Some artificial saltwater manufacturers will not include silica in their mix. However, drinking water can often contain significant amounts of silica (~14mg/l). Since diatoms are photosynthetic, limiting phosphorus along with silica can control their population within aquaria. Silica can also 'plate out' on hot surfaces (such as heaters or pumps allowed to run dry) and can be difficult to remove. Definitions ppm Parts per million, essentially the same thing as milligrams per liter (mg/l) Phosphorus A non-metal element considered essential for all life forms. It has an atomic weight of 30.9738 g/mol; its symbol is P. Phosphate Phosphorus bound with oxygen, and almost always the form of phosphorus found in aquatic environments. Ortho-phosphate or reactive phosphate This form is readily 'bio-available' for plant and algal growths and is the type measured by hobbyist test kits. It may be suspended or dissolved in the water column. Often reported as PO4-3, the recommended amount in a successful reef aquarium's water should be low (less than 0.05 ppm, or mg/l, if you prefer). When we consider that the phosphorus (P) portion of phosphate (PO4-3) is only about 1/3 of its weight, we can easily see that the 'reactive' part is only about 0.017 ppm. However, hobbyist test kits report ortho-phosphate as PO4-3; hence the recommended value is 0.05 ppm or less. To convert PO4-3 to P, divide by 3.066. To convert P to PO4-3, multiply by 3.066. Total Phosphate the sum of ortho-phosphate (easily measured) and that phosphate converted to ortho-phosphate by a severe digestion process employing potassium persulfate and sulfuric acid. Total phosphate can be suspended, dissolved, or incorporated in animal and plant tissues and is usually less bio-available for encouraging algal growths. Two Little Fishies Two Little Fishies, Inc. (or TLF, Miami Gardens, Florida USA) has been providing products to the pet industry since 1991. They offer a variety of products ranging from fish and invertebrate foods to aquarium supplements. Two of their offerings were selected for this month's Product Review - the PhosBan Reactor (model 150) and PhosBan phosphate/silica adsorbent. PhosBan phosphate adsorption media. The PhosBan reactor is a 'fluidized bed' (meaning the water to be treated flows upwards through the media and gently suspends at least some of the media particles). Treated water exits the reactor and returns to the aquarium. If all goes according to plan, the reactor's effluent will be depleted of phosphate and silica. How well do these products perform and are they worthy of your consideration? These are the recommendations made by TLF: For use on freshwater or marine aquaria, up to 150 gallon (568 liter) capacity. Flow rate through reactor should be 20 - 30 gallons (76 - 114 liters) per hour - this will require a pump capacity of 100 - 200 gallons (379 - 757 liters) per hour. A Maxi-Jet 500 (a misprint in the directions - a Maxi-Jet 400 or similar pump will work just fine) is recommended, but throttling will be required using the supplied ball valve. Excessive flow rates may cause the media to crumble - the directions use the synonym 'friable'). Reactor capacity depends upon the media. The 150 reactor can hold up to a maximum 200 grams of PhosBan media (5 inches or 12.7cm height within the column, with a recommended minimum of 2 inches or 5cm). The column can be filled to capacity when using granular activated carbon. If an amount of PhosBan required is below the minimum depth within the reactor, TLF recommends mixing PhosBan with activated carbon. Phosphorus Removal by Granular Ferric Oxide (GFO) Iron particles possess a natural positive charge (these ions can have a valence of 2 or 3) while phosphorus possesses a negative charge. Since opposites attract, the phosphorus can be bound to iron (in this case, the ferric state, or Fe +3) thus removing it from solution and preventing it from fueling algal growths. It is uncommon (and difficult) for hobbyists to distinguish between 'bio-available' phosphate (called 'reactive' or 'ortho-phosphate') and total phosphate (organically-bound) since the latter requires specific laboratory testing procedures and equipment. I wondered what impact PhosBan would have on organic phosphate concentrations and decided to test for it (see the 'Methods and Materials' section below for details). Figure 1 shows the results of testing for Total and Reactive ('ortho-') Phosphate over a period of 12 hours. Figure 2 demonstrates that, when ortho-phosphate content is subtracted from the amount of total phosphate, the level remains relatively stable, indicating removal of reactive ortho-phosphate only. Figure 1. Time-course Reactive (ortho-) and Total Phosphorus removal by PhosBan. See Discussion section (below) for comments. Figure 2. Total Phosphorus remained about the same during the experiment which is not surprising, as much of this element is probably found in suspended particles (algal cells, bacteria, food scraps) and not readily available to promote algae growths. Silica Removal TLF also claims that silica is removed by PhosBan as well. Figure 3 shows the results of testing 3 samples gathered over a 21-hour period after initiating treatment with PhosBan. Figure 3. PhosBan quickly removes silica. Effects on pH A Hach HQ40d data logger equipped with a calibrated pH probe recorded pH values every five minutes over the course of 36 hours. pH fell slightly, but some of this drop is attributable to rising temperature (temp data not shown, and due to powerheads' operation within the aquarium). See Figure 4 and the Discussion section below for further comments. The effects of PhosBan on alkalinity would be a better metric of its impact. See below. Figure 4. pH of treated water fell over the course of 36 hours, but see comments in the Discussion section below. Effects on Alkalinity Directions for use of the PhosBan Reactor state that alkalinity will drop when 5x the recommended amount of PhosBan is used. Under the conditions of this experiment, alkalinity dropped by about 19% when PhosBan was applied at about twice the recommended amount. See Figure 5. At face value, this may seem negative until we consider that the presence of both phosphorus and silica lend to alkalinity (Standard Methods, 1998). Therefore, a portion of alkalinity drop could be attributable to their removal, and results generated by alkalinity testing in this situation could be partially attributed to removal of 'false' alkalinity and not a drop in carbonate content. Figure 5. Alkalinity was negatively impacted when PhosBan was used at about twice the recommended amount (100 grams for 182 liters - 48 gallons) - but this is not necessarily a bad thing! Note that alkalinity was marginal to begin with. See text for details. Water Color Color of water can be estimated using a comparator or a colorimeter/spectrometer. Color is due to dissolved organic substances (called gelbstoff, German for 'yellow matter') in the water column. Generally, color due to these substances is yellowish and is reported in Platinum/Cobalt units. A few milligrams of dry PhosBan was placed in a beaker containing 100ml deionized water and allowed to sit overnight. A sample was analyzed for color (at 455nm). PhosBan did not impart color to the water. On the other hand, GFO has the potential to remove organic substances causing yellow water. This was not tested. Discussion and General Impressions The PhosBan Reactor 150 is constructed entirely of plastic and acrylic materials and is safe for use in freshwater and saltwater applications. The clear acrylic material of the reactor itself appears to be about 1/16" (~1.6mm) thick and is rugged enough to withstand some abuse. The 90°elbows fitting the barbed fittings atop the reactor are made of a soft rubber-like material and are friction fits. Use cable ties to affix these 90's to the reactor if desired - avoid stainless steel worm clamps that might compress and break the barbs. This reactor holds about 36 fluid ounces (1,075ml) and has a useable capacity of about 26.5 fluid ounces (~785 milliliters). Assuming PhosBan has a consistent density, the 150 reactor will hold approximately 7.3 ounces (207 grams) of this material. Using the manufacturer's recommendations for loading, the reactor will hold enough PhosBan to treat a maximum marine aquarium size of 200 gallons (757 liters; using 50 grams for 50 liters). It should be sufficient to treat a 400-gallon (~1,500 liter) freshwater aquarium. Note that these ratings are higher than TLF's recommendation of a maximum aquarium size of 150 gallons. Under the conditions of these tests, TLF's 150 Reactor containing PhosBan quickly removed both phosphates and silica to levels below the detection limits of the spectrometers (for our purposes, the concentration of both silica and ortho-phosphate fell to 'zero'). GFO can potentially remove other chemicals including cobalt, manganese, zinc and nickel (Holmes-Farley, 2008). All (save the latter) are important micronutrients for algal growth. The effectiveness and rapidity of GFO in sequestering these is unknown to me. Likes: Reactor is well made yet relatively inexpensive Media is relatively inexpensive and lives up to manufacturer's claims Ortho-phosphate and silica are effectively and quickly removed to levels approaching zero Recommended pump (Maxi-Jet, not included) is readily available, reliable, inexpensive to purchase and operate Device (ball valve) to regulate water flow through the reactor is included Directions are appropriate and easy to follow The reactor can be used with other media, such as activated carbon Effectiveness of any GFO product in removing some 'trace elements' (Mn, Zn, Co, for example) from artificial seawater is unknown Instructions not available on TLF's website (I routinely misplace directions and did so for a while during the course of writing this article) Conclusion TLF's 150 Reactor and PhosBan media performed as advertised. Under the conditions of this testing, both phosphate and silica concentrations fell to levels below the detection limits of 'laboratory grade' instruments. There is some concern about depleting reactive phosphate levels too quickly and/or for extended periods of time (remember Liebig's Law of the Minimum discussed earlier). Proceed slowly with the application of any product in a reef aquarium and closely watch corals for negative reactions. While reactive phosphate is effectively removed, the same cannot be said about the form of phosphorus (acid hydrolysable) that requires vigorous laboratory digestion processes before analysis. Information suggests that almost all of the acid-hydrolysable phosphorus is suspended - not dissolved - in the water column and this form should not be of much concern to hobbyists. The media reactor is well made and should provide years of service. The adsorption material is relatively dust-free (although it should be flushed with water per the manufacturer's recommendations) and has not crumbled and added any apparent particulates or color to the aquarium water. In addition, there were apparently no significant negative impacts on water chemistry even when used at twice the recommended amount (however I would strongly advise hobbyists to follow the manufacturer's directives). The successful application of these products in aquaria around the world is a testament to their functions. If you're battling algae outbreaks and need a quick solution, give these products a try. Materials and Methods A 55-gallon (208 liters) was filled with 48 gallons (182 liters) of well-aged artificial seawater from a fish-only aquarium. A PhosBan Reactor 150 was installed according to manufacturer's recommendations. Since the suggested amount of PhosBan for 48 gallons of seawater did fill the reactor to the minimum recommended level, the dosage was doubled to 100 grams of PhosBan phosphorus adsorbent to fill the reactor to the recommended depth of 2 inches (~50mm). A Maxi-Jet 400 provided flow, which was regulated to 19.6 gallons per hour (~1,240 milliliters per minute) using the supplied in-line ball. Baseline water samples from the aquarium were gathered in PO4-3-free bottles, and again at 0.5, 1, 2, 3, 11.5, 21, and 36 hours after starting the reactor's pump. These were analyzed for Total Phosphorus and Reactive Phosphorus using a Hach 2800 Spectrometer, DRB 200 Dry Thermostat Reactor, and reagents from Hach (potassium persulfate and sulfuric acid for digestion, and ascorbic acid method for analyses). Hach advertises the range of the ortho-phosphate analysis to be 0.02-2.50 ppm and total phosphate as 0.06-3.50 ppm (both expressed as PO4-3). Alkalinity (as calcium carbonate; CaCO3;) was determined using a Hach Digital Titrator and alkalinity reagents, using a calibrated pH meter and probe to determine titration endpoints (which varied from 4.5 to 4.8, depending upon phosphate concentrations and the presence or absence of silica) . A Hach HQ40d data logger equipped with a pH probe measured and recorded pH and water temperature every 5 minutes. Silica was determined by a LaMotte Smart2 colorimeter using LaMotte silica reagents (high range - 0-75 ppm, using ammonium molybdate in an acidic state, with oxalic acid added to prevent a reaction with phosphate and molybdate). </h2><h2>References [*]American Public Health Association, 1998. Standard Methods for the Examination of Water and Wastewater. Washington, DC.[*]Holmes-Farley, R., 2008. Reef Alchemy: Iron oxide hydroxide (GFO) phosphate binders. Reef Keeping Magazine Online. View the full article

Click through to see the images. A n I n d o o r T r o p i c a l T h u n d e r s t o r m ! Aquarium: 120" x 80" x 24" (950 gallons) | 200 x 300 x 60 cm (3600 liters) Lighting: 12 x 100 watt LED (equivalent 12 x 250 Watt HQI) This is probably the most elaborate LFS tank you will ever see. The folks at HPAquaristik recently uploaded a series of short videos of their new main reef display. Suffice it to say, I am in awe of the thought that went into the storm-simulation system of their massive system. The LED lighting system (minus rain system) We're not just talking about random cloud cover simulation using LED lighting (ho-hum application these days). We're talking about a full blown storm simulation system, with beautifully simulated ambient lights and "lightning strikes"... and actual rainfall! Freshwater is fed into an irrigation system suspended over the tank; Each day, a simulated thunder and rain storm showers the main display with freshwater for a couple of minutes. This is without a doubt the most elaborate evaporation top-off system I know. It's far from my place to offer constructive criticism on this awesome system, but integrating pump programs with the lighting system could create an even more spectacular simulated storm. Unless you're a serious malcontent, there's no way these videos do not inspire you: A full walk-around of the 950 gallon (3,600 liter) reef display Simulated thunderstorm, complete with rainfall! Above-the-tank view of the simulated rainstorm A short video demonstrating simulated cloud cover View the full article

Click through to see the images. The folks over at Piscine Energetics recently announced the addition of a blister pack that contains both PE Mysis and CYCLOP-EEZE. Both of these products have a long-standing positive reputation among the marine aquarium industry for providing a nutritious food source for marine organisms. PE Mysis are harvested from glacier-fed mountain lakes in Canada and come naturally gut loaded with phytoplankton and are very high in Omega 3 & 6 HUFA and amino acids. CYCLOP-EEZE are a biologically engineered micro-crustacean that are cultured in a shallow arctic salt lake and contain extremely high concentrations of the critical biological pigment Astaxanthene which brings out the color of your fish. Previously, consumers were forced to purchase the products individually, and typically they were packaged as one large amount which can sometimes lead to premature spoiling. Now, we're excited to know that by purchasing this product, you'll have the ability to satisfy all of your livestock with one solid product. The twin packs contain one 4 oz. blister package of PE Mysis and one 4 oz. blister package of CYCLOP-EEZE, which is especially convenient for those with nano aquariums, as well as those who choose to perform smaller, more frequent feedings. Some local fish stores and online retailers have already started stocking this twin pack, and many others are expected to receive them in the coming months. If your LFS doesn't already stock these wonderful foods, I strongly encourage you to ask them to do so by contacting a P.E. sales representative. View the full article

But if we have a big logo behind on a Polo T-shirt , i am just concern that the design look a little bit funny ? Unless we have only the new SRC emblem logo embroidery on the chest for the Polo ?

Telling your partner to watch her weight is not recommended -- unless you're a male cleaner fish, according to a new study. View the full article

Telling your partner to watch her weight is not recommended -- unless you're a male cleaner fish, according to a new study. View the full article

Researchers have identified regions of a fish brain that reveal the basic circuitry for how humans and other vertebrates generate sound used for social communication. View the full article

Researchers have identified regions of a fish brain that reveal the basic circuitry for how humans and other vertebrates generate sound used for social communication. View the full article

The Gulf of Mexico's hypoxic zone is predicted to be larger than average this year, due to extreme flooding of the Mississippi River this spring, according to an annual forecast. View the full article