Daniel Poh Yang Zheng

This is amazing... nvr tot my 1/2 past 6 tank will get featured.. Sent from my iPhone using Tapatalk

Just a short update as to what has been happening... I took the chance over the last few weeks to clean up my sump abit....clear out some stuff and also rinse stuff... Cleaning my CR media of all the Cal Media Fines So now it runs cleaner...less choking... and also i decided to decom my eheim media reactor and bag all the media to one big bag so that it is easier to clean and contain... had to rinse it two times to make sure all the detritus are out of the media.... and not being put back in the system... I rinsed them in RODI water which was a mistake...i should have rinsed them in a salt water mix so that the media bacteria will not die out... but it is already done when i remembered....so double my dose of bacteria in to repopulate the medias... I manage to find a bigger reactor...so to a new Chaeto Reactor...double in volume and size... Woot.. Did a full para test check out on the system... And also my new additives are here.... cant wait to get it going...and see what difference it will make to my tank... Regards Daniel

how many watt? Sent from my iPhone using Tapatalk

Hi all, i am looking for a Calcium Reactor for my system... Do Hit me up with your offers.. Thank U.... Regards Daniel Sent from my iPhone using Tapatalk

good deal..for a gen3 pro Sent from my iPhone using Tapatalk

Hi all, Do anyone have got a Deltec Calcium Reactor PF 501 let go... i am interested in getting one... Regards Daniel

Hi all, Do anyone have got a Deltec Calcium Reactor PF 501 let go... i am interested in getting one... Regards Daniel

u got the sws? Sent from my iPhone using Tapatalk

does dosing Kalk increase ur dkh indirectly? Sent from my iPhone using Tapatalk

Hi all I am looking to sell off my ATI 5ft T5 8 Tubes Dimmable. Tubes are not sure how old...but better that you change them if u r getting them to run on SPS. Condition 8/10 Looking to let go at 600sgd Regards Daniel

nope.. it does not come with driver.. best is if u knw someone who can solder Sent from my iPhone using Tapatalk

Flow Basic... I have been worried about the amount of flow in my tank... but now haha...according to Ecotech... 3 x MP40 in my tank is too much... So what do u think?? Is it really too much??

U can get from reefmarketsg.com Sent from my iPhone using Tapatalk

Currently right now i am opening up my gate valve fully to see the volume of overflow return to sump will caused any gurgling effect...so far it has been really awesomely quiet... I will monitor it further... and if there is any issue....if there is no problem...i will leave it open and remove it when i mod/change my sump... Stay in tune for a new sump build To have a refugium or should i just put the refugium into a reactor...

I will monitor the growth of the chaeto... it has been running for a week now on a reverse cycle.. Test Kit reading Hanna PO4 ULR - 32 ppb - 0.098ppm Nyos NO3 - 10mg/L Salifert NO3 - 2.5mg/L I am not sure which one to follow but people been telling me to follow the Salifert one and also see how it goes in the tank the corals.. I am not too worried because it is not say very far apart... Hopefully when the chaeto takes off....i wanna remove my AIO biopellets.... already decommissioned my gfo reactor already so i will continue to monitor the PO4 levels...will try to bring it down to between 10 to 20 ppb which is good enough for a clean yet not too clean tank.... so now i am waiting for the chaeto to confirm some growth...then i will take it out the aio biopellets or reduce the amount inside.... i am not too sure if the AIO is working efficiently but i will like to remove it to move from a artificial carbon source to a live macro algae export method.

I made a chaeto reactor out from a Fluidised Reactor. Buying Grow Light (4red:1blue) from China and solder the stuff togather... It is also rated to IP68 which meant it can be used underwater. Now it is photo of it sitting in the sump which i made some space for... I also did a clean up of my sump area by clearing out most of the controller out of the sump area...

FTS Update I rescape some parts to create more space for Sps.. and move my zoas and lps to a lower light area... Sent from my iPhone using Tapatalk

Depends on what is ur main export method.. if u r not having a refugium... then go for the Nyos 300.. because you can't really skim the tank too clean one.. especially if u feed the fishes.. Sent from my iPhone using Tapatalk

Update Changes due to write error Output of the CR is not reduce to drips but to a trickle flow and PH controller is running cut off at 6.75.. but CR PH will just hover around 6.82.. i previously put 7.xx which is wrong....

Yupz.. my PH probe is abit out of cal.. by 0.2ph... Paiseh for pointing out the error.. it should be 6.xx not 7.xx haha... my error in the post..i will edit to change it... I buy the intense second hand.. the previous guy don't knw how to tighten it and destroy the washer, so i replace the washer and got it tested and the rest was history.. Just cal both PH probe one for CR and another one just to monitor tank PH and both of them was out by 0.2 and 0.3 respectively.. so now my tank ph is in a better level... Sent from my iPhone using Tapatalk

Did Socks Laundry today.. First Rinse out the dirt... Wash in Washing Machine with Bleach and then do second wash with rinse and spin only without any detergent to ensure socks is clear of bleach... Soak them in RODI water first before drying them to keep... Sent from my iPhone using Tapatalk

Manage to change out my Co2 regulator to the Intense which was soooo much easier to tune.. Seriously anyone who wanna run co2 cr should invest in the intense regulator.. especially if u wanna fine-tune the bubble rate... Right now i am running my CR on a different concept.. Output of the CR is not reduce to drips but to a trickle flow and PH controller is running cut off at 7.75.. but CR ph will just hover around 7.82.. this allows the dkh to maintain at 7.7dKH.. Sent from my iPhone using Tapatalk

how come it is black in color? u cover it with a black sticker?? Sent from my iPhone using Tapatalk

i don't think there is a need to find the balls to replace it..just put in new ones when 2 weeks comes Sent from my iPhone using Tapatalk

gt warrenty? Sent from my iPhone using Tapatalk