Silentlurker
SRC Member-
Posts
152 -
Joined
-
Last visited
-
Days Won
1
Content Type
Profiles
Forums
Gallery
Everything posted by Silentlurker
-
I've seen it at madpetz online shop. Alternatively, any hardware shop should have also.
-
Bro, I suggest invest in a 25L jerry can and do your salt mix in there. You can use an air stone to circulate and mix the water. After that siphon out and use when necessary. What ever is not used can keep.
-
Opps. Maybe that's what happened that's why it's so moody. Will observe for a while. Lucky it's still interested in feeding
-
Why don't drip first then float the bag later to acclimatise temp? I'm not running a chiller so my drip temp not that different from tank temp. Lowest I got was high 26s using a fan which I run from 8am to 9pm. Usually it's about high 27 with the fan on
-
Bought the below from GO mid last week but didn't ask them what is was. So far I haven't seen any tentacles at all. It has serated edges and it eats when I put food into its mouth. Just curious if there are plates out there that don't have tentacles? Have seen it puffed up a bit but not to the extent that it becomes a dome.
-
I rinse with fw and let it dry after use. So far haven't rust. For siphon to work, the drip source must come from a higher pressure to a lower pressure. Unless you can put the source bottle higher than your tank you acclimatising it in, it won't work.
-
Here is a photo. Very easy to prime the siphon. 1-open the valve 2-submerge the short end into the water until the water almost reaches the valve 3-shut the valve 4-insert the short end into the tank water and long end into the bag u want to drip into 5-open the valve and regulate the drip rate according to what you need.
-
You need the following items: Air Tube hose (the hard plastic ones and not the silicon ones) 2 'L' joints to fit the air tube 1-2 suction cups to hold the air tubes in place 1 metal valve for the air tube 1) Use the Air Tubes and L joints to form a inverted U. Make one end of the U shorter and one end longer (shorter end goes into tank). 2) Add the metal valve (use this to control the drip rate) to the longer end and add another piece of air tube so that it goes into the pail/bag/tank you want the drip to go into 3) use the suction cups to hold the tubes in place I'll try to post a photo when I get back Using the above, you don't even have to suck to start the siphon Hope this helps.
-
Blue/Green Chromis would be good and also not hurt the pocket much if you have to get a school. Do note they eat like pigs and will usually be first to the food.
-
Bump Also have an Eheim Pro3 2075 inclusive of media about 3 years old to trade.
-
Please check this link:
-
Some updates. Visited GO and Pinnacle over the week and got some new stuff. Black clown hosting the BTA New livestock added. Vanderbilt and Barrier Reef Chromis Yuma Two other random corals.
-
Weekly Shipment Updates 27 Oct - 02 Nov
Silentlurker replied to FuEl's topic in Weekly LFS Stocks Report / LFS Info Centre
Anyone seen duncans available? -
Weekly Shipment Updates 27 Oct - 02 Nov
Silentlurker replied to FuEl's topic in Weekly LFS Stocks Report / LFS Info Centre
Those looking for super sun, Pinnacle had a few pieces -
Weekly Shipment Updates 27 Oct - 02 Nov
Silentlurker replied to FuEl's topic in Weekly LFS Stocks Report / LFS Info Centre
Sexy anemone shrimp spotted at ah Beng. There was a packet with like 8 inside at 10am -
Weekly Shipment Updates 27 Oct - 02 Nov
Silentlurker replied to FuEl's topic in Weekly LFS Stocks Report / LFS Info Centre
Think Ah Beng might have in the inside tanks -
Looking for a 1/10hp chiller. Have the following items to trade: 1xMaxspect Glaive 30cm model M40 (condition 9.5/10) - still with warranty Bought from DE aquatics during their grand opening on 31st August 2014. Used for less than 3weeks before I upgraded to Razor Nano 1xTunze 6045 wave maker (condition 10/10) brand new never touched water or plugged in Bought on 1st Sept 2014 Please PM if keen. Thanks.
-
Sorry for lack of update. Over the last 2-3 weeks, added some new livestock. More cleanup crew consisting of: 2xTurbo snail 1xNarcissus snail Also added some easy corals from pasar malam: 2xBlasto 1xMicromussa 1xGSP Some other livestock: 1xBTA 1xSwales Swissguard Basslet 1xclownfish 1xMaxima clam Pardon the CMI photography.
-
Bro, Few of our sponsors here can help: Iwarna The Fush Channel Aquarium Artist Think DE Aquatics also does Do give them a call Hope this helps
-
Looking for 3-4 pieces of LR about 2"-5" to put on substrate.
-
Looking for 3-4 pieces of LR about 2"-5" to put on substrate.
-
Guess it's time to take out the super glue and seal them in.