LittleBurger

Most important piping layout rule..... REMEMBER, Do NOT have any piping at skimmer area during your planning. Overlook this. With the big valve & the PVC piping at the skimmer section, installing & removing the skimmer, skimmer cup & maybe raising the skimmer upwards for the recommended water level would be extremely difficult or impossible. Luckily it is spotted by CR uncle before water is added. Waiting for him to drop by tomolo to amend it towards the right.

I got 1 pack of 18kg carib sea New oolite sand about 1-2mm size from madpetz plus grade 5 aragonite from qianhu. Yes, u r right. High change of sand storm. It's hard to judge at what height should i place my return pipe. Ken(madpetz) had suggested to put in some fine sand on the bottom of the tank and see later where the fine sand gathers. From this, I can put the bigger sizes sand & fine sizes at the respective location. But sometimes, nature got its own way. Just like my clown fish when it want to spawn, it just sweep the sand up & flying. I only got 1 Mp40wES. Currently in nutrient export mode. My 2 return outlets will have 45deg angle attachments. So will play around if should i direct them pointing each other or away. Hopefully it can minimize the sandstorm. How's the performance of compact 3000? I like the energy efficiency. Here comes the tank....

.... stands for "Or Bak Kart"... "Kun Bey Loh" Countdown about 8hrs....

The QT tank is a standalone tank with a drainage pipe with a valve to the sump. Initially is planned for my NSW replacement routine. So was thinking if not using it then can use as a QT. So didn't really plan if this NSW tank can double up as a QT tank. It came at a later stage of "bao ka liao". So after Desi pointed out need light, probably need to buy a small clip on light & a airpump.

Initial planning stage was to have a "non PVC" & pumps tank. Means that u only see the corals,fish rocks. But making a box to contain the vortech so as to hide it, is a risk I can't take as i'm afraid I will be limiting the vortech's efficiency. So LL see the vortech propeller. For hiding the return pipe, my wishful child thinking cannot work. So tank maker will try to minimize the exposure. Already got idea to hide my return pipe but not urgent to do it now. My external overflow is a Y shaped so as to cater for my vortech pump installation. I read that for overflow, it is best to have the full width of the tank for surface skimming. Surface got many "la sup". Not sure how true is that. But viewing at Ah beng's tank(full width overflow) confirm my doubts. So I wanted full width overflow but if my overflow is a full width rectangular block, then I can't install my vortech pump. So the overflow shaped became a Y shaped. I wanted to have underflow for better detrius exportation. My overflow is a Y shaped, overflow is 18" wide. So my underflow can only take the same width as my external overflow width. To make the underflow, a piece of glass is cut & installed on the inside of tank, facing the external overflow. Then this form a small thin box. I will take close up pics once the tank is delivered. As I am very particular about getting a as close as possible 3x3 cube, I was told by Uncle Dan that I will lose 6mm of internal width. So Uncle Dan extended a bit of the tank width to "compensate" this "flaw".... My chiller temp setpt is at 27.5deg. So far I observe my chiller takes about 1hr to run too. I bought a room thermometer & my living room temp is 28-29. What is yr return pump brand? Previously I was using a haelia 100watts as return & ehiem 1262 as my old skimmer pump. After I upgraded my skimmer, I threw away my 7yr old haelia(should keep for emergency ) . Used ehiem 1262 as return. Skimmer pump wattage is 27watts. I notice my chiller kicking less often & even kick in, it takes shorter time. However, i'm waiting for next yr's summer period & see how's the chiller running. Am contemplating to use dry ice as a supplementary chilling source. I'm hoping my TR15 dun "surprise" my in the negative direction. I've got 1 unit of radion. Am planning only 1 unit as I'm concern about power consumption. Also I want mixed reef whereby the part which is brightly lit will be SPS, slightly lit will be LPS, NPS & totally no light coverage will be NPS. This is just a vision & fat hope. Dun know if filtration system can cope.

The reason my returns are low is cos normally top & mid section flow is already covered by wavemaker(vortech pump) as their spread is wide. However for bottom flow, normally it's weaker. Adding another vortech adds cost, and my wavemaker is off at nite. It also seems like once my wavemaker is off, particles will subside at the bottom. So I was thinking why not have the bottom area keep stirring throughout the day. That's why I placed my return so low. Been asking around here about how to prevent the backflow to sump if pump kaput. Got the advices from the reefers here & from Coral Reef to drill a hole at the top of return line. For the QT, didn't know need a light. .... Was thinking to just add a airstone in it. Normally I buy NSW from Coral farm, one trip buy 4 packs. Currently I hold 1 bag up, cut the corner then bend down & pour into sump.... extremely tedious & "watery" biz. So this QT tank actually has a pvc pipe & valve that leads to the sump. So I will put a puncturing device inside the tank & put the bag into the QT. Once the bag is punctured, the water will flow down to the sump. But since now want to do swee swee, maybe going to do salt mix rather than NSW cos been hearing NSW not good. So the QT can only be used for NSW only when there's no fish inside.

If the light set is light? The radion is 5kg on paper spec. So i guess it is light compare to mh. I've found the nylon bolt plug. Is tat wat u call the butterfly? So inserting a timber is actually the timber doing the support? The gypsum bd hole will collapse over time?

Buy LS over subject to ava quarantine & charges rite unless..... So when u gonna add in LS?

Got a call to go down and view my tank yesterday evening. It was a hard nite for me... can't sleep. Stayed awake till 3plus am then forced myself to get some rest. Got chided by my CO behaving like a little boy...heh heh heh. Armed with a camera and went down today. Pls remember to tear a parking coupon just in case. Nearly got 3 reds flying off. There it is.... Slowly went thru the piping connections with Uncle Dan & his party, trying to figure out the best orientation to maximise human ergonomics & minimize space wastage. Somehow didn't go for lunch but didn't feel hungry at all...

Thanks for the tip everyone. Looks like drilling on concrete is the safest.

Planning to hang light fixture on false ceiling. Anyone try tat? Wat is the name of the kit? I know for wall u get the wall plugs... But for false ceiling have no idea. Thks.

There's a electricity consumption cal here. For 500 litres, will be 4ft tank probably. Yr room temp where yr tank is, the surrounding temp of yr chiller,heat generated by equipments such as pumps, MH light heat up water, will affect yr power bills greatly. Yr bills might increase by abt $50 per mth. In sg, elec bills is scary. So i feel it pays to spend more to get energy efficient parts.

Ah beng at pasir ris I got see. Seasonal I suppose. But heard that maiden's hair hard to keep... U want to make it like planted tank izzit?

Was informed that tank delivery will be postponed to next fri on this wed.... Was actually looking forward to today to start working off the tank... alas... bo pian.... Also my water pressure not enough for the 5 stage RO/DI(only 12plus PSI nia) so need to spend $ for the booster pump... Awaiting for booster pump for the RO unit. Bleed too much $$ so cannot buy caribsea sand... bought from qianhu the cheap cheap classica aragonite %5.50 per 5kg pack. In the mean time just put inside current tank, hopefully make it "live", shorten the cycling time.... i hope. Got 2 stalks of green off siloso beach. R they mangrove shoots? As I will be putting my chiller inside my cabinet, got a 20cm by 20cm plastic pc fan to be used as a exhaust fan. (Power is 3.36w, Cost $25. Brand coolmaster. Bought from SLS,F*w***. Actually there's a shop in level 5 selling at $15, but LL buy already.) Got another 2 unit of 14cm by 14cm plastic exhaust fan(Power is 1.68w, cost $18, brand coolmaster. Bought from F*w***. Also a shop in level 5 is selling cheaper) either to pump air into the sump area or vacuum air from sump area with 6" air duct(Cost $17. Bought from bukit batok enterprise hub, level 1. Cool air systems trading 01-147). Got a pc of concrete drill($4.15, homefix) to drill LR. Got some acrylic spoons from daiso to cannibalize the stalks to be inserted into the LR's drilled holes. This should join the LRs together. Learnt this method from reefcentral. Got great excuse to buy a cheap weighing machine($13.90, selffix at vivo. CO said watson selling $10...) telling CO we can use to monitor our weight.... of cos it's for me to use to weigh the LRs. Going to try to get the amount of water displace by the LRs, substrate & equipments. Not sure if it is necessary. Manage to find a acrylic shop Ying kwang acrylic trading at enterprise hub(48 Toh Guan Road East #01-136 Enterprise Hub Singapore 608586). Have not tried its services yet. Going to make a base stand for my skimmer to get the recommended water level submersion. For those staying in the west might find it more convenient.

Yoyoyo.... New radion software out. Natural mode enabled.

I got mine recently at $1065. James, r u planning to hang the radion? For yr case, it's quite close to the water rite? I see that u have 3 units of lighting. Maybe if u move up the lighting, u will only use 2 lighting units Instead of 3. Saves power & $.

U r rite. Looks the same.

Is it puffer or boxer? Major black plus little yellow. Body is streamline but hovering. anyone wants? going release bck if not. There are some zoas, tunicates at the rocks... water level at knee level. water damn dirty. Wonder how they survivie...

How's your compressor performance? U put above your current aircon compressor?

pura carbon, POx4 & biopellets. Want to keep SPS, LPS & NPS. So probably feeding more & try to prevent nutrients from staying in water for too long. Not sure if it will work. Took the layout from Ken. So overboard to get 3?

. Just like an interior designer. Pics tell a thousand words. Able to spot errors & make changes more easily & clearly. U machiam know who's my gf C......

Getting a real hobby Been reefing since 2004(probably Finding Nemo effect),so bought off the tank from a marine shop(closed liao) at Farmart. For these years, didn't really put my heart & soul & $$ into it. Just getting by. Buy coral & LS, if die off, then buy again, not enough devotion. Thankfully, the Nemo effect does not wear off. Reefing is always fascinating cos you always find strange stuffs growing in your tank, unlike freshwater. Now that I've grown older(menopause), I feel that I need to have a true hobby, a hobby that will "enhance" my family times. Spending a few grands on car parts & only utilizing 2hrs a day does not make sense to an old man now. Furthermore, my CO would prefer I spend something at home than on car... Thoughts during planning Initally was planning for a 4x3x2 tank with external overflow, am curious why there are reefers who decomm. Was wondering did they see something at the later part of their reefing journey? Will I experience the same issues? Finally time & money comes to mind. Time = maintenance(probably only water changing) & $$ = power bills. Bigger tank needs more vol of water change, more lighting, higher rated chiller. Went to Madpetz & saw Ken's 2 ft cube. Though it's 2 ft, somehow it looks "full". He has another 4x2.5 tank too. Choosing a right size tank that complements the room is to me, quite important. Somehow asthetically, there is a form of ratio, like the golden ratio. too huge a tank that blocks our walking paths seems to create a frustrating effect(maybe like fengshui). Therefore, the decision come down to a 3x3x2 rimless with external overflow & 4.5ft cabinet. Choosing a tank maker There are only 3 "boyfriends" A,B & C to choose from. Initially my heart was for A, but I feel that I am courting for the love of A, instead of the guy doing the chasing. Then comes to B. B offers me "top grade glass heels made in japan" but the heels is still greenish in color. To me, dun really care if the heel is made where or top grade, as long as it's not crystal clear, it's normal heels. This boyfriend is always busy, make appointment for dinner liao, called to remind him the day b4 but tell me change other day. If I never called to confirm appointment, I guess I would be sitting in the restaurant by myself. Finally, it is C. C is a patience & humble boyfriend. Gives me my crystal glass heels without me selling off my bras for it. Without any hesitation, I know my choice is C.... Tank layout planning With the size of tank & cabinet in mind, I paid a visit to my tank maker with my basic design & questions. Got the measurements of the cabinet & sump thereafter. With them, I marked my floor planning.

Measured 3m at madpetz. Ken told me no cny sale for it, bey tahan n bought one. Actually that type of power connector is like those used on those US made machinery. Can self made the extension, if not wrong only live, neutral n gnd. But guess 10ft more than enough. yr DIY stand is nice. Am wondering if can make a L shape stand with an attached clamp at one end. Else will be buying the ceiling kit later. is yr stand just resting on the groove of the hood/tank edges or u got a screw to secure it?

R u hanging it? Power cable long enough?

So u mean there's 2 hanging kits? So when u restart tank, u gonna use only led?