whq

Bro very nice setup... hope you recover quickly and set up... can get some pointers from you too... I see that you have a computer fan mounted on your cabinet. Can i check how do you power it? Is it by red and black cable of fan connected to a 12v adapter?

Recieved a few queries on grade 3 sand... grade 3 refer to the grain size... grade 0 being the finest and bigger number will means bigger gravel size.

Hi All, Bought too much sand in excess. Still have 3 unopened bags of sand (grade 3) for sale. Bought at S$8 each and selling at S$6. If buy all 3 bags, selling at S$5 each (total S$15). Please sms/watsapp 91141924 only. Collection at Sengkang or Yishun

Bro, you also have a very nice tank... have been reading your thread as reference:)

Initially decided on bare bottom but did not quite like the empty feeling... added sand and lowered to flow rate to prevent hurricane in the dt

Thanks bro, your eyes are sharp! This tank setup is heavily influence by AM arrangement. Like the idea of clean simplicity with ample of room for fishes to roam around. So eventually buy some beautiful tang like your tank lol.

Thanks bro for the compliment! Nice we can share some pointers too. Thanks bro, wanted to create more space for swimming area. The left rock mainly planned to have sps on top with yuma below. The right rock mainly some sps with lps and some zoas. Hopefully whole arrangement to give a very different 3 way viewing experience

Dead rock sunned and epoxy... placed in dt to start the cycling process. My initial scaping...

Found chiller. Thanks all

Found chiller. Thanks all

Nice tank, do you have heat dispersation issue in your cabinet?

Still looking for chiller. Many thanks

Finally tank is in and initial setup... partial water filled will continue tomorrow and start cycling... Some equip purchased Skimz sm161 from a nice bro Jebao dc12k Pending final purchased of chiller Covered for now to prevent dust...

Found jebao dc 12k and pending skim skimmer Still looking for hailea 66a chiller... hope to find one soon...

Still looking... anyone?

Still looking for above. Equivalent skimmer can also be negotiated. Thanks

Hi bro do you the dimension and if it is good enough for a 4 x 1.5 x 1.5ft tank?

Looking for the following Hailea 66a Jebao DC 10k Deltec SC1350 / Skim SM201 / BM curve 9 Please sms/watsapp me at Nine1141Nine24 with price, condition and years used. Many thanks!

Bro is you plan for seperate sales please let me know.. i be keen in ur skimmer n chiller. Thanks

Thanks bro, will follow up with pic soon... my tank will be coming next week. Skimmer is definitely a big concern for me...

After years of considerations, finally embarking with a bigger tank. Have doing nano tank quiet while reading and learning. With this new embarkment, i like to share some of my setup plans. Hope all bros can give some advise to fine tune my tank. Tank size: 4 x 1.5 x 1.5ft with sump (custom made and pending delivery due to new house renovation) Lightset: Ati sunpower 6 x 39w (will be collecting from a bro and still thinking of the tube combo) Skimmer: bubblemagus nac 3.5 (understand this is severely underpower, but due to budget i planning upfrade for this at later time) Wavemaker: jebao rw 15 Return pump: jebao dc 10k (will do a t-joint to chiller, the return to main tank will be splitted into another 2 inlet at front and back of tank) Doser: 4 channel jebao doser (currently planning for fauna marin balling lite, any comments or reccomendations?) Ato: smart auto top up system (which compartment do you guys put it in? Planning for the return compartment in sump) Chiller: hailea 66a feed off from jebao dc 10k Overflow: will go into a 4inch diameter filter sock from main tank This tank is mainly planned for a mixed reef tank with top portion dominated with sps and bottom portion with various lps. Currently also planning for a thin layer of sand for contrast, but abit worried on the dirty sand bed look. For my sump, i am thinking of setting up a diy algae scrubber using the airlift method supplemented with some chaeto. Is this sufficient to avoid using fr for nitrate and phosphate resin (reducing cost as well as wanting tank to be as natural as possible) Hope to hear some advice.

After years of considerations, finally embarking with a bigger tank. Have doing nano tank quiet while reading and learning. With this new embarkment, i like to share some of my setup plans. Hope all bros can give some advise to fine tune my tank. Tank size: 4 x 1.5 x 1.5ft with sump (custom made and pending delivery due to new house renovation) Lightset: Ati sunpower 6 x 39w (will be collecting from a bro and still thinking of the tube combo) Skimmer: bubblemagus nac 3.5 (understand this is severely underpower, but due to budget i planning upfrade for this at later time) Wavemaker: jebao rw 15 Return pump: jebao dc 10k (will do a t-joint to chiller, the return to main tank will be splitted into another 2 inlet at front and back of tank) Doser: 4 channel jebao doser (currently planning for fauna marin balling lite, any comments or reccomendations?) Ato: smart auto top up system (which compartment do you guys put it in? Planning for the return compartment in sump) Chiller: hailea 66a feed off from jebao dc 10k Overflow: will go into a 4inch diameter filter sock from main tank This tank is mainly planned for a mixed reef tank with top portion dominated with sps and bottom portion with various lps. Currently also planning for a thin layer of sand for contrast, but abit worried on the dirty sand bed look. For my sump, i am thinking of setting up a diy algae scrubber using the airlift method supplemented with some chaeto. Is this sufficient to avoid using fr for nitrate and phosphate resin (reducing cost as well as wanting tank to be as natural as possible) Hope to hear some advice.

Found lightset from a nice bro. Pending collection early july. Thanks all for viewing Sent from my 2013023 using Tapatalk

Anyone have this lightset to let go? Looking for this light set for my new 4ft x 1.5ft x 1.5ft setup. Please pm me thanks Sent from my 2013023 using Tapatalk

Still looking.... hydra 52 considered too Sent from my 2013023 using Tapatalk