malmah

Hi Bro and Sis, Started a FOWLR Nano with Tank as follows: Tank - 36 x 30 x 30 cm. filter - Ehime 2213 connected to Under Gravel Cooling - by 2 Fans able to bring to 26 Deg C Light - Simple LED with 4 Watts Top Up Water - using Smart ATO , approx 700 ml per day. Top Up Tank of capacity 4 Ltrs. The tank had cycled for 23 days and is accommodate all small Benny fishes and One Singapore Angel. Thks n rgds. Malvin

thanks. rgds. malvin

to: Mr Vincc In fact< i did not fully elimated the Algaes issue. Initially, almost every 2 days the Algae had fully grown on the 4 Panel Glass (almost 60%). After I change the LED Light from 110w to 60w and daily dose of either Goodby PO4 and Redsea No3:PO4-X, atleast, now every week about 5 to 10 % of the 4 four been covered with Algae. Thks/rgds. malvin

To: Mr Tunicate Thanks for the compliment. Yes, I had changed the LED Light from 110W to 60W. Believe this is one of the Reason the Algae had reduced. Thks/rgds. malvin

To: All Bros and Sis after almost One year of struggled to rectify the Algae issue and studied from this forum, atleast now slightly better (rather than every 2 to 3 days cleaning of algaes) Almost give up during the progress to control the algaes issue, however, everytime log in the forum and seen Bros/Sis in here thier succeed, it had inspired me to carry on. Thanks. And here my Tank. Malvin

Sorry Mr Harman. Rgds. malvin

Good Day Mr Harman, I had one Hailea HC 100 (1/20Hp) used Chiller. If you don't mind, you can have it FOC. I had used it for my Freshwater Shrimp for almost 2 years. Is working Fine, except it a bit Noisy when the Compressor Run. I stay in Taman Jurong. Call me if you want. Thks/rgds. Malvin (H/P: 97360207)

Good Am Mr Solo77, I had this problem before with my Arctica 1/15 Chiller, And the Rep Technician for Arctica is Mr Lai Xing (H/p: 93680559). And the Control Panel was changed. Thks/rgds. malvin

Good Day, I bid $18.00 for Zoas 2. Thks/rgds. Malvin

Thanks All Bro and Sis, for the Encouragement. Happy New Year. Malvin

Good Day Gentleman and Ladies, After 3 weeks of Cycling and Tunning. Finally my Simple Tank is ready to receive LS. Attached some Simple Photos (I apologise of the Poor Image): For sure, there's still a lot of things to be done and rectify. And sure need All Experts and Seniors in this Forum to Enlighten me. Merry Christmas and Happy New Year. Thks/rgds. malvin

Good AM Mr Jameshong, Correct me if I am wrong. If your New Pump have Humming Sound, there's could be the Motor is still not Stable (Run In) yet, it is not Air Pocket, you can hear or feel it more Clearly when placing the Pump Outside the Tank (Dry Method). Let it Run for few more day and do not Throttle the Inlet and Outlet Flow. It should go away few days later. It is ok to use Flexible Hose on the Outlet Side but try not to use on the Suction side. Elbow is not ideally go for Outlet as it will create Some Back Pressure which may cause some Heavy/Over Load on the pump. If need to, try avoid Straight 90 Deg Elbow, you can find those Smooth Curve Elbow (Green Color) from any Accesory Fish Shop. And try to Shorten the Length on the Outlet Hose or Pipe. If you place the Pump in Dry Method, try to place it atleast 0.5 mtr lower than the Tank for Better/Easy Gravity Suction. Thks/rgds. malvin

To: Mr Charlie, I had PMed you. thks/rgds. malvin

To: Mr Jameshong, I had tried quite a number of Delivery Pumps between 600 ltrs/hr to 2300 ltrs/hr for the past of my Fish Tanks. And in my opinion, I will still prefered New Jet Pump, consider the Price, Efficient and Power. Also, I don't feel any noise in Submerged in Tank. For your info, my present New 1.5 Ft Cube Tank, I had changed to New Jet 2300 (Italy Make), - is Adjustable from 1000 to 2300 Ltrs/hrs and Power is own 38 Watts. And price is less then Sgd 110.00. For your info, please. Thks/rgds. malvin

Good Am Skinbone, Thanks and you are welcome. Rgds. malvin