RockyBoy

Bro ..??

You can buy super strong magnets from one shop at ubi. Can't remember which shop. Damn strong....quite difficult to seperate once attached.

Senyap aje ....korang keluar outing ker?

Hari nih sembayang kat mana semua... ?

cute fruits

Wak Din yang mana siak...

Alo Bros semua....lama gua tak chitchat kat sini. Sekarang free sikit sebab dah R.O.D mood kat kerja. Maklumlah besok last day. Aku nak setup new 3ft tank. Ada recomendation sapa boleh buat?

Try our sponsor, Reef Depot ...

From the back, the connection is quite smooth with no holes.

The modified reducer fit nicely.

Cut the 2 inch portion of the 2 reducers:

The modified neck using 2 reducers. Original reducers:

Best of luck with your interview.

Water level is based on the height of the outlet side, but still able to control using the valve. I've estimated the level to be before the sloping portion. Key thing is to control the bubble size only. Anyway, I can see the water level from the top as the top collection cup is acrylic.c

Thanks for those who have PMed me...

Any recommendations who or any shops that can top-up my chiller gas? Mine is resun chiller. Would be great if he can do housecalls.

Haha..learnt from the master...

Reef Depot selling them. Reef Depot But I've ordered from states directly.

Yo bro... not really test out... would be a permanent feature now. Quite happy with the performance. Using 4 inch instead of 6 inch. No space for the 6 inch. The neck size is already reduced. From 4 inch to 1.5 inch. I've used 2 reducers. One is 4inch to 2inch and 2 inch to 1.5inch. I cut the 2 inches portion and glued the big and smaller ends. On top of it, I have a hole at the top which is connected to the air intake of the mazzei to assist the foam to rise up as well as to release the air pressure in the cup.

Top view of the inner tube...

There is another tube inside the main one. The main reaction chamber is the inner one.

Ehiem 1260...

Another..

Only acrylic is the top of collection cup, which you could see some foaming after less than 1/2 hr starting up...