wedgee

Maybe it came from Japan's ocean? No offence...

Upz.... Good skimmer ready for collection!

Thanks.....upz!

Finally, a Product Review of the EV240 from Bob Goemans, PhD in Freshwater and Marine Aquarium Magazine! Read it here

Injector, Air Valve, and John Guest Speedfit fitting

Side View

Front

Taken from AquaC website EV - 240 Spray Injection Protein Skimmer The EV-240 replaces our popular EV-200, but those words alone are unable to do this new skimmer justice. We've built a monster that can go head-to-head with every other sub-$500 skimmer on the market today - we've tested it against all the popular Beckett and downdraft type technologies and this skimmer consistently yielded exceptional results. The enormous mixing box and beefy 6" diameter foam tower make for excellent contact time, while our patented spray injection system guarantees ultra-quiet operation. A John Guest Super-Speedfit fitting is standard equipment on the EV-240 and allows for direct-to-skimmer calcium reactor hookup (blowing off excess CO2 can help stabilize tank pH). The EV-240 runs off one spray injector and builds a 14" high column of solid foam. You won't have to worry about a noisy or hard to clean injector with this skimmer and the Twist-Lock flanges feature the security of EPDM gaskets with the same ease of cleaning as our original EV Series. Freshwater and Marine Aquarium Magazine ran a review of the new EV-240 in their September, 2002 issue. Click here to read the results! New features for 2002 • Designed to sit directly on sump bottom - up to 10" of sump depth • 3/8" precision ball valve for air flow control • Super silent - you won't hear it running • Virtually no bubble return to sump - we guarantee it • Twist-Lock flanges make for secure connection without screws • Mixing box has been increased by 40% = greater contact time • Larger collection cup drain • John Guest Speedfit fitting standard for calcium reactor hook-up • Larger, wider diameter foam tower Specifics • Height: 26" • Footprint: 10.75" x 6.75" • Input: 3/4" hose barb • Output: 1.5" gate valve • ¼" John Guest "Speedfit" fitting standard equipment • 3/8" FTP air inlet with precision ball valve for foam tuning • 5/8" collection cup drain • 6" x 10" OD foam tower • Auto-waste container compatible - flanges feature EPDM gaskets • Patented Spray Injection System (U.S. Patent # 6,156,209) Installation • In-Sump • Stand-Beside • Inline with sump

Due to aeroplane, skimmer up for sale again.... Upz..... btw, this skimmer doesnt have to be run by a pressure rated pump, apparently some people are quite misinformed and seem to think the world of such pumps...

Thanks bro! UPZ......!

Hi all.....i have 1 x AquaC EV240 Protein Skimmer for sale..... Specifications for EV-240: - Dimensions: 10.75" x 6.75" x 26" (L x W x H) 27cmx17cmx70cm LBH - Spray Induction style protein skimmer designed for in sump or stand alone use with aquariums from 80 - 350 gallons. - Comes complete with air inlet with precision ball valve for fine tuning and collection cup drain. - Input: 3/4" hose barb. - Output: 1" gate valve. - Required Pump rate: 900 - 1000 gph. - The unit is completely self-leveling and may be installed alongside or in the sump in up to 10" of water. Skimmer only, pump not included. Going for $520 only! Brand new is $700++.. The EV240 is the one circled in red... Interested parties please call pm me!

upz!

Thanks bro! Reserved by alergnon...

upz!

upz.....pls pm me if interested! thanks! forgot 2 mention i serviced the chiller for $160....with receipt to prove...and 3 months warranty thrown in... hope its a good deal for e buyer

upz.... forgot that the chiller 3 core wire has been extended to about 3m long, u wont need to worry about the length of the plug wire...

upz!

Bro can let go yr CO2 tank abit lower? Nowadays fill up CO2 damn exp...have to refill it after buyin fr u lei...Thanx alot

replied all interested pms... Chiller is prepped and ready to go! Fully serviced with 3 months warranty to boot...

Hi all, i have 1 Reef Relief 0.5hp chiller to sell, just fully serviced with receipt to prove. Its a very quiet chiller as well. Hoses will be provided...... Asking for $600 neg. Bought at $1300 brand new..... Interested pls pm me......

upz!

I think mine is a case of no gas in the chiller, and I dont mind bringing the chiller down to the shop for servicing. Can someone tell me where is good and cheap?

U know what guys, lets not start saying that its a ridiculous amount to claim based on what we know here, perhaps it is really true that there were expensive equipment, furniture in there that has been ruined by the tank breakage. I dont see why all of us being marine hobbyists, should just jump to the defence of the tank makers. Sure it might be a huge amount and the customers probably didnt know better, but if the tank crack did cause a serious amount of damage, i would too claim for a justifiable amount of compensation, if i had paid for a tank that i had thought would not crack.... I also feel that even if the claim is not successful, it is perhaps a wake up call for companies to provide adequate information for their customers. The onus was on the company to perhaps find out about their customer intended purpose for the fish tank and advise accordingly. I dont think the customers should suffer if there is a lack of support from a company who is supposed to be the better of the two in terms of the technicalities in a sale? I tink not knowing that the tank cant take e weight of SW is not an impossibility for alot of people - we know that from the finding nemo craze... Of cos $100k is an unreasonable amount to claim but i tink $20k is not too far from being reasonable...?

thanks people for upzing mi sale... upz!

upz!