nutx

ok..roger..... my first war zone over.....and intruder won the battle! my YT came out of hiding place after 5-6 days, and has conquered the battle ground...my PT is now kanna chased left, right, center by the YT....hahaha! will try powder series next.....saw many type yesterday.... blue, brown, black, grey, and AT...dunno who should go in first! still thinking hard!

my suggestion is to increase the flow toward the back of your tank, and reduce the current in the front part of your tank, then the anemone will shift out. and the lights cannot be too strong, if you are using MH. Anemone do not like too high water flow. and usually when we setup our tank, we will always tend to have a 'visual' higher water flow in the front part of the tank.

just thinking why your tank is still not declared as a war zone yet? so many tangs inside? some more all abt same shape, like the powder series...

I can lend you my fish tank to house your fish...no charges.

you may want to lower the water level of your tank, and try silicon back the brace. the silicon will be cured in 8-12hrs...and it will helps to release some stress on the glass.

I tho u post this question in one of the other thread, and somebody recommend u to got for 10inches?

how would he know whether the fish is cyanio or net caught? I think any people with a sound mind, will not tell the buyer, "Hey my fish is cyanio caught..will die 2 weeks later!" same for his supplier!

if turning brown and at the rate....

wah ....can buy 4D tomorrow leow... the flood just before the new sump commission! got 水！

The penalty for the 1st disruption is not out yet, which was expected to be a fine of 1mil or a % of profit... and July we are going to have a rate increase due to higher operation cost... looks like the consumer is always at the losing end! Thanks to the failure Power Net project!

my area Ang Mo Kio also ok...... haha...Bedok maybe Joe_P is playing with his new powerful toys!

another view

1ft +

my favorite (using lousy DC)...dunno wat...

This one has been there for sometimes leow...except that last time, it was placed deep inside the display tank....and not open so big yet! signz....cannot afford it!

in term of function, it is perfectly all right. One main reason why there is a glass panel is bec if the pipe breaks, the glass level control the water level in your tank. without the glass, whole tank is drained out. 2nd, in reef tank, you have to be careful not to have any rock lean against the pipe, else u are asking for a flood! 3rd, with sand on the base, the fine sand will eventually wear out the silicon joint for the piping, and create a leaking....also, if there is a leak at the joint, you can't repair it, unless you clear your whole tank.

ya..by then the MH rusted leow... upz...for the sales!

Your water level is so high up in the neck of the collection cup? wouldn't the skimmate be very liquid?

hi..your new toy will get lots of sunlights, and algae will grow inside...it is very difficult to clean inside.

and worst still...crack your tank!

Yup, the INEXPERIENCED (as in short timeframe with reefing), but on a very fast track learning...and now a guru!

if you can take out that LR, then soak it in very salty water. otherwise, have to train yout spearing skills.

no problem...it's me that is sorry abt it due to that ich outbreak...and a friend pass me a clown tang last week as he tear down his tank...now got ich again!

bubble_gum, with so many reading on others setup, I suggest you plan your equipment first, before getting the tank, so that the tank and sump can be alter accordingly, like height of stand must be able to fit in Skimmer, if skimmer is in sump type. sump must have the relevant partition, if you intend to have refugim, UV lights, to remove micro bubbles from skimmer return. Sump must drill holes if intend to use dry pump (eheim also can run dry). Tank hood can hold the MH u intend to get (whether is commercial type or DIY type., etc....

Yup, the 1/3hp. The recommended flow is 2000-3000l/hr according to the manufacturer...and my connection is from sump to chiller to main tank, with chiller at 1.5ft height and main tank return at abt 2m height....so if I use other pump, the head loss will be quite a lot, consider the flow thru the coil, etc. hmmm...still thinking and considering.