mengyang_neo

Upppppp price neg!!!!!!!!!!

Everything look good. =) Hee where is your latest addition? =p

Can get ATI sunpower 4x80w T5, with this set of lighting, u should be able to keep almost everything. Price should be within your budget.

What fish is that?

Bro very nice, there is only 2 set of LED or u got supp with T5, the light look verywel spread. =)

Picture

Hi bro, yup i got install the temp cut off device. The bulb is reeflux 12k, the colour quite nice, bluish white not too white and not to blue, just nice.

Haha ya lor, after 1 big round still go back to mh, hopefully i make the right move. =)

Nice, with 2 x 250w mh running, compresser took 35 min to cool down 2 degree.

Hood balanced, light and compressor install. =)

All fishes reserved. Thanks.

Will be letting go some of fishes to reduce bio-load for my new tank. Can reserve now and collection will be next week after i catch them, date to be confirm, Pottery angel (2 inch) $80 watanmi pair(4 inch alpha male and female) $150 Flame angel (2 inch) $50 Bartlett's Anthias x 5(1 male, 4 female) $170 True percula clown (2 inch female, B grade Picasso) $25 All are feeding on pellet and with me for 9 mth and above, interested please pm me with your contact number, viewing and collection will be at buangkok crescent. Thanks.

Up for the best skimmer. =p

Bro no hurry, after u get your tank, u will need to cycle your tank and do your rock scape. The rock scape will determine how many wave maker u need? What u going to keep is important also, for sofies with some fishes, maybe 1 at each side is enough.

A lot of reefer ask me whether I can sell without booster pump and mention they do not need a booster pump, but the question is why a booster pump is needed? The RO membrane works best when the input pressure is in the 60-80 PSI range. Lower pressure reduces the output and increases the ratio of waste to purified water. If your input pressure is less than about 40 PSI, you should consider getting a booster pump. This is the answer to why a booster pump is needed and recommanded. http://www.3reef.com/forums/spectrapure/why-use-booster-pump-your-ro-rodi-system-72249.html

From my understanding, RO will get it to very low TDS reading but not possible to be 0 u will still need DI to remove the rest, to get a 0 reading in TDS.

Hi bro, nice to see u post a tank thread here, I think u have most of the basic equipment but you will have to decide what you want to keep. Example the equipment for keep FOWLR and SPS tank will be totally different. But the main equipment will be the same, like skimmer, go for the best within your budget and remember to ensure the skimmer can fit into the sump. Other thing that u need is bio material like biohome plus, bio ring, etc... to bring down nitrate. For equipment there is a lot of brand out there with different design and pricing, but in general what u paid is what u get, for german brand equipment, we are paying a lot for for reliability and performance. For performance, now a lot of the China brand do come out with similar design with good performance at a lower price tag, but reliability is a big question. Hope it is helpful.

upppppp

Hi all after check with my friend, yup crislwp, u are right, EX 5.1 should be 100 gal instead of 400gal. sorry for the mistake. And the link u show is correct but this set from my friend come with addition booster pump =) Thanks.

Hi I am selling EX 5.1 with a booster pump so the spec is following the EX 7 (400gal) model. The site u post is without booster pump so only 100 gal.

Delay with the compressor so I cannot transfer stuff over so the cycling time is prolong, haha which might be a good thing

Thanks bro. Up for the good stuff. =)

Hi bro, hee I will coming to get some gem from u soon. =) Oh I am still running my existing tank, so running both tank side by side. =)

Hee u can still come, my old tank is still running.

Thanks bro, =) Equipment sold, mod please help me close it. Thanks.