Hi
Have a pack of Sulphur Beads around 1 kg for sale @ SGD 10.OO
Resun reactor @ SGD 10.00
aquamedic PO/carbon reactor @ 20.00
Self collect @ Sengkang.
this is how i DIY my DI water...
1. cut some slots at the container...
2. cover them with fine mesh to prevent the resin from coming out
3. cut a hole at the cap and attach to the outlet of the pump
4. pour the resin into the container and screw the cap on
5. put the pump into the water drum and fill it up with tap water
within hrs (depend on your water vol) it should turn to zero reading
this is how i DIY my DI water...
1. cut some slots at the container...
2. cover them with fine mesh to prevent the resin from coming out
3. cut a hole at the cap and attach to the outlet of the pump must be tight fit
4. pour the resin into the container and screw the cap on
5. put the pump into the water drum and fill it up with tap water
within hrs (depend on your water vol) it should turn to zero reading
today is my 3rd time treating the water with 4 cups of small KFC mash potato cntr from the day i first created this post..
total water treated 180L today with out changing the resin...
"set my determination for sps "
I had been hearing that for years .... are you this time determination for sps ? u still have lots of other fishes ....
Guys
Just to check how much are your total electricity usage per household..
Recently when i was checking my bills. my total electricity usage per month is around 570kWh.
I was wondering how a 4rm flat with 2 person and a 2 ft cube reef tank using LED ... seldom on aircon can use such an amount of electricity... Thus thinking of getting PUB to check my meter after comparing your usage if mine is abnormal.
Please let me know how much is your electricity usage per household...
this should be a easier option and fast to know the result
i would suggest that you put the exit of the chiller hose to the return pump compartment 3rd if i not wrong which moves water to your main tank
This way the return pump will move the chilled water to your main tank. put the hose near to inlet of the return pump so it will draw more chilled water
another way get some experience reefer to go to your place and help... this will be the fastest way...
i would suggest the chiller return goes directly to your main tank.. this way you will have 2 return to your main tank .. in case either one fails u still have the other working.
agree that good resin should give 0 ppm and dont release PO4.
been using this grade of resin for a long time and it does reduce to 0 ppm.
within 1hr it reduce to 4 ppm ... and amount of resin use is 4 cups of small KFC mash potato cntr. the highest amount of water treated with this method is around 240L..
fast and get the job done...