Bulk DIY 3-stage DI unit

[shootsimon]

Hi all. Seems quite a lot of people are interested in DIYing a DI unit.

So if the number is right I'll be heading another session.

Total cost will depend on the number of people participating.

It will only cost a hundred each set when we have 10 head counts.

Please state your nick in this thread and pm me your contact number if you are interested. Looking at holding the session by mid or end of June.

This is the end product

[Jameshong]

Hi all. Seems quite a lot of people are interested in DIYing a DI unit.

So if the number is right I'll be heading another session.

Total cost will depend on the number of people participating.

It will only cost a hundred each set when we have 10 head counts.

Please state your nick in this thread and pm me your contact number if you are interested. Looking at holding the session by mid or end of June.

This is the end product 

Hi bro,

May i know how long can the filter cartridges last (by litres) ?

Do we need to change 3 filter cartridges at one go or separately?

What is the cost of filter cartridges replacement individually?

Paiseh..paiseh, ask so many Qs ! hope u don't mind!

Cheers & Thanks.

[kelstorm]

can i just get the DI resin?

[yongwil]

Hi Shootsimon

Pls add me in

thk

yongwil

[shootsimon]

Hi bro,

May i know how long can the filter cartridges last (by litres) ?

Do we need to change 3 filter cartridges at one go or separately?

What is the cost of filter cartridges replacement individually?

Paiseh..paiseh, ask so many Qs ! hope u don't mind!

Cheers & Thanks.

You don't need to change all 3 at the same time as they have different exhaustion rate.

The sediment filter need to be changed only when it turns brown and it all depends on how dirty your water source is. Older estate tends to exhaust faster as the pipings are old. You'll be getting 3 sediment filter as it comes along with the filter housing. Mine till date has filtered about 400 litres still not changed yet.

The Carbon Block can filter in thousands of gal stated on the print but I'm not too sure of that.

Different brand has different specs. You can choose to believe or not to. What I suggest is 3/4 the amount stated.

As for the resin, till date the resin that I'm using can get you between 250L to 350L at 0ppm and if you still can accept 15-20 ppm it can last about 350L to 450L but again it depends on your water quaility and the type of resin that you can get hold of.

[shootsimon]

Ok please put your nick here and also please pm me you number as I would not be taking any deposit but least you can do is give me your mobile number

1) yongwil

[ervine]

Ok please put your nick here and also please pm me you number as I would not be taking any deposit but least you can do is give me your mobile number

1) yongwil

Count me in on this:

1) yongwil

2) ervine 97401381

[kelstorm]

1) yongwil

2) ervine 97401381

3) Kelstorm 96520875

[Jameshong]

You don't need to change all 3 at the same time as they have different exhaustion rate.

The sediment filter need to be changed only when it turns brown and it all depends on how dirty your water source is. Older estate tends to exhaust faster as the pipings are old. You'll be getting 3 sediment filter as it comes along with the filter housing. Mine till date has filtered about 400 litres still not changed yet.

The Carbon Block can filter in thousands of gal stated on the print but I'm not too sure of that.

Different brand has different specs. You can choose to believe or not to. What I suggest is 3/4 the amount stated.

As for the resin, till date the resin that I'm using can get you between 250L to 350L at 0ppm and if you still can accept 15-20 ppm it can last about 350L to 450L but again it depends on your water quaility and the type of resin that you can get hold of.

Thanks.

[shootsimon]

1) yongwil

2) ervine 97401381

3) Kelstorm 96520875

Ok so far 3 interested parties. Spread the news with friends you know so I can bargain for lower cost For those who don't wish to hands on the DIY but wish to own a set can pm me for discussion

[kelstorm]

To be specific so that to avoid misunderstanding.

1) yongwil

2) ervine 97401381

3) Kelstorm 96520875 (Resin only)

[cjh]

1) yongwil

2) ervine 97401381

3) Kelstorm 96520875 (Resin only)

4) jinhui (you got my no.)

[yongwil]

Add in my contact

1) yongwil 9272 0789

2) ervine 97401381

3) Kelstorm 96520875 (Resin only)

4) jinhui (you got my no.

yongwil

[lyz77]

Bro simon, if u wanna split the cost of the resin, count me in!

[shootsimon]

Bro simon, if u wanna split the cost of the resin, count me in!

ssssh............

[lyz77]

[playstation2]

Bro shootsimon,

Another session!!!!

Wat happen to ur present one??

[shootsimon]

Bro shootsimon,

Another session!!!!

Wat happen to ur present one??

Its still working great. Just helping out and to make more friends

Received quite a number of PMs after the first session about it so decided to hold another session. You're weclome to joint in the fun again This time you be the teacher of cutting pipes

[lazybones]

1) yongwil 9272 0789

2) ervine 97401381

3) Kelstorm 96520875 (Resin only)

4) jinhui (you got my no.

5) Lazybones 97462058.

Btw, will using those water filter(mounted on tap for drinking)

help as a RO before passing into the DI unit?

Thx.

[loster]

1) yongwil 9272 0789

2) ervine 97401381

3) Kelstorm 96520875 (Resin only)

4) jinhui (you got my no.

5) Lazybones 97462058.

6) loster

[playstation2]

Its still working great. Just helping out and to make more friends

Received quite a number of PMs after the first session about it so decided to hold another session. You're weclome to joint in the fun again This time you be the teacher of cutting pipes

Dun want la, later photo kana expose in here again......

Anyway, u guys enjoy urself!

Must remember to post the DIY session's photo hor!

[lyz77]

Remember to bring wines or beer during the DIY session!

Juz kidding!!!

[shootsimon]

Missed out 1 important thing. Session's location is at Bedok Reservoir View

[loster]

1) yongwil 9272 0789

2) ervine 97401381

3) Kelstorm 96520875 (Resin only)

4) jinhui (you got my no.

5) Lazybones 97462058.

[blackpuma]

1) yongwil 9272 0789

2) ervine 97401381

3) Kelstorm 96520875 (Resin only)

4) jinhui (you got my no.

5) Lazybones 97462058.

6) Blackpuma 98439088 (Hand injured, cannot diy now but like to enjoy MO prices