Jump to content

Adding Lr


dankoo
 Share

Recommended Posts

This is going to be tricky. Make sure you buy cured LRs. Ask the LFS, but some times you may get the wrong info from them.

If the LRs are not cured, these will kick off another nitrogen cycle in your tank, and kill your current inhabitants.

To be on the safe side, better cure your own LRs.

Link to comment
Share on other sites

cured or uncured also no use. when u transport home,

there will be definitely some die off. this will have undesirable

effect on your tank bio-system.

If not, u can bubble the LR in a pail, after certain days,

add it into your tank.

Link to comment
Share on other sites

I normally get LR from CFarm...are theirs cured?

Don't know.

Too be safe, do this;

1. Mix a batch of salt water in a pail.

2. Leave your LRs in the pail for a week or two.

3. Aerate the water. Use a pump and an airstone.

4. Change water if it get very smelly.

This way you can confine the nitrogen cycle to the pail. If water doesn't smell, LRs should be OK.

Transfer LRs to your tank. Proceed with caution and small amounts. Test your water for ammonia.

As for myself, I leave new LRs in my quarantine tank for 2 weeks, before I transfer it to my main tank.

Cheers

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

 Share



×
×
  • Create New...